Abstract:(A) Effect of various micro‐structure development (scheme images) in EWF‐fracture behavior (FESEM images) of PP/EPDM/SiO2 ternary blend‐nanocomposites, (B) FESEM images taken from the sub‐surface zones of EWF‐fractured specimen of PP/EPDM/SiO2 (One‐step) ternary sample showing the sequence of micromechanical deformations under quasi‐static EWF test. This study investigates the mechanical properties and fracture behavior of polypropylene (PP)‐based blend‐nanocomposites comprising 30 wt.% ethylene–propylene–diene monomer (EPDM) and 5 wt.% SiO2 nanoparticles. Different mixing sequences were employed to prepare the nanocomposites, and the resulting morphology development and dispersion states of modifiers were analyzed. Mechanical performance of the nanocomposites was evaluated through quasi‐static and high‐speed dynamic fracture tests. The dispersion and distribution of SiO2 nanoparticles within the nanocomposites were significantly influenced by the mixing protocol. In impact fracture tests, the presence of nanoparticles exhibited a beneficial efffect on fracture energy, demonstrating a synergistic toughening effect of the soft EPDM and rigid SiO2 particles. Conversely, adverse effects were observed in quasi‐static tests. Essential work of fracture (EWF) parameters indicated an increase in the yielding component and a decrease in the necking‐to‐tearing component with SiO2 incorporation into the PP/EPDM blends. During impact loadings, the highest improvement in crack propagation resistance was observed in nanocomposites with nanoparticles localized around the rubbery domains forming a network‐like structure of EPDM/SiO2‐nanoparticles. Morphologies where rubber domains and nanoparticles were separately distributed in the PP matrix resulted in the lowest fracture parameters. Energy dissipation mechanisms were elucidated, revealing multiple void formation followed by matrix shear yielding as the primary source under both quasi‐static and impact fracture conditions. In the latter case, stress‐concentrating percolated structures in the PP matrix facilitated the nucleation of dilatational bands evolving into highly stretched void‐fibrillar structures upon further loading. These findings contribute valuable insights into tailoring nanocomposite morphologies for enhanced mechanical performance in different loading scenarios. Highlights Fracture behavior of PP/EPDM/SiO2 ternary systems was evaluated by EWF methodology and Izod impact test. Rubber particles surrounded by silica nanoparticles led to a percolated morphology and as a result to superior impact resistance. EWF parameters were mostly controlled by the tearing‐related parts regardless of phase morphology. The impact toughness was mainly controlled by the dispersion and distribution characteristics of the SiO2 nanoparticles.

Tensile Properties And Morphology Of Pp/Epdm/Glass Bead Ternary Composites

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Mechanical properties and morphological structures of short glass fiber reinforced PP/EPDM composite

Mechanical Properties Of Pp/Epdm/Nano-Sio2 Ternary Composites

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Tensile Properties of Rigid Glass Bead/HDPE Composites

Experimental Analysis of Mechanical Properties about the Glass Bead-filled Polypropylene

Dao Dian Ju Yi Que - Dan Xing Ti Fu He Mo

Mechanism and properties of Super-Toughened ternary blends with unique 'Tassel-Bundle' morphology

Processing–microstructure–fracture toughness relationships in PP/EPDM/SiO2 blend‐nanocomposites: Effect of mixing sequence

Effect of Glass Fibers with Different Surface Properties on the Morphology and Properties of Polyamide 6/poly(butylene Terephthalate) Blends

The Cellular Structure and Mechanical Properties of Polypropylene/Nano-CaCO3/Ethylene-propylene-diene-monomer Composites Prepared by an In-Mold-Decoration/Microcellular-Injection-Molding Process

Development of chopped glass fiber composites with difunctional benzoxazine and bio‐based phthalonitrile copolymer: A study of mechanical and thermomechanical properties

Mechanical behavior of carbon/glass polypropylene hybrid composites

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Interface Effect on the Mechanical Behaviour of Rigid Particle Filled Polymer

Damage to Rigid-Particle-filled Polymer under Cyclic Tension

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperature

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric