Recovery of Indium from Used Indium–tin Oxide (ITO) Targets

Yuhu Li,Zhihong Liu,Qihou Li,Zhiyong Liu,Li Zeng

DOI: https://doi.org/10.1016/j.hydromet.2010.09.006

IF: 4.217

2011-01-01

Hydrometallurgy

Abstract:A novel hydrometallurgical process was developed for the recovery of indium metal from used indium and tin oxide (ITO) targets, which includes acid leaching, removing tin from leach solution by sulphide precipitation and depositing sponge indium by zinc cementation. The leaching of indium reached 99% with ITO powder size of less than 75um and initial acid concentration of 100g/L H2SO4 at L/S ratio of 8–12 and 90°C for 2h, while only about 8% of tin was leached out. Tin in the leach solution was reduced to 10mg/L and the loss of indium was less than 1% by sulphide precipitation under H2S partial pressure of 101.3KPa and 100g/L H2SO4 at 60°C for 10min. Pure sponge indium from purified In2(SO4)3 solution was obtained using zinc plate cementation at pH 1–1.5 and 65°C.