Abstract:Recycling Sn from waste liquid crystal display (LCD) is crucial to alleviate resource shortage and prevent environmental pollution. However, the disposal of waste LCD is a complex coupling process affected by multi -factors. The lack of mature harmless and resource-based treatment process restricts the development of indus-trialization. Therefore, an environmentally sound process focusing on resource recovery was proposed to recover Sn efficiently and remove toxic substances from waste LCD in this study. The reaction mechanism and leaching kinetics were discussed assisted by mechanical activation, and the statistical and mathematical method (Box-Behnken Design (BBD) model) was adopted to optimize the leaching process. The results showed that the me-chanical activation could improve the physical and chemical properties of ITO glass. The essence of the leaching reaction mechanism was that the H+ in H2SO4 combined with O-2-in the lattice of In2O3 to form OH-, resulting in Sn-O bond broking and Sn4+ entering the aqueous solution. Furthermore, the Zeta potential results showed that the Zeta potential of SiO2 particles less than 0.035 mm was close to zero near pH 2, resulting in agglom-eration between SiO2 particles under the action of Coulomb force. The leaching kinetics was well expressed by the shrinking core model. The BBD model showed satisfactory correlation between the predicted and actual results, and the particle size was the most critical factor affecting the leaching efficiency. The maximum leaching efficiency was 87.6% which was obtained under the following optimal condition: 6 mol/L H2SO4, 108 min, 88 degrees C, and 0.035 mm ITO glass powder. Our findings demonstrated that the developed recovery process was both efficient and environmentally sound, which had the potential in the industrialization of waste LCD recycling system.

A novel method for synchronous separation of In/Sn from waste indium tin oxide (ITO) target: In-situ regeneration of nano-ITO powder

Waste ITO target recycling for efficient indium recovery through a closed-loop process

Reduction Volatilization Behavior of Indium Oxide in Indium-Tin Oxides (ITO) Wastes Under CO/CO2 Atmosphere

Efficient extraction and separation of indium from waste indium–tin oxide (ITO) targets by enhanced ammonium bisulfate leaching

Recovery and Reuse of Spent ITO Targets through Electrochemical Techniques

One-step separation of tin from e-waste by a chemical vapor transport process (CVT): Preparation of nano-SnO2

Kinetics of indium separation and recovery from In–Sn alloys in ITO waste target products via vacuum evaporation

Recycling of waste indium tin oxide target for In-Sn alloy production based on molten salt electrochemistry

A Study of Separation of Indium and Tin from Waste ITO Target Leach Solution by Sulphuration Process

Removal of Tin and Extraction of Indium from Acid-Dissolved Solution of Waste Indium-Tin Targets

Recovery of Indium from Used Indium–tin Oxide (ITO) Targets

Recovery of Indium from Waste Liquid Crystal Display Screen by Reduction Roasting under H2-H2O Atmosphere

Indium Recovery from In-Sn-Cu-Al Mixed System of Waste Liquid Crystal Display Panels Via Acid Leaching and Two-Step Electrodeposition.

Synthesis of Tin-Doped Indium Oxide Nanoparticles by an Ion-Exchange and Hydrothermal Process

Study on the Adsorption Behavior of Tin from Waste Liquid Crystal Display Using a Novel Macroporous Silica-Based Adsorbent in One-Step Separation

Research for Indium and Tin Separation from ITO Waste Target by Method Hydrochloric Acid Leaching Process

High-purity Indium Preparation from Waste ITO Target by Hydrochloric Acid Dissolving-Aluminum Substitution-Smelting-Electrolysis Process

Novel Process for Tin Recovery from Waste Print Circuit Boards (wpcbs) by Selective Oxidation Roasting under H2O Atmosphere

Efficient recovery of indium from waste indium tin oxide (ITO) targets by pressure leaching with sulfuric acid

STUDY ON ATOMIZING-COMBUSTION TECHNIQUE FOR NANOSIZED ITO POWDER

Leaching Behavior and Process Optimization of Tin Recovery from Waste Liquid Crystal Display under Mechanical Activation