Abstract:A novel micro porous electrospun polymer electrolyte membranes comprising a blend of poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) containing various concentrations of potassium perchlorate KClO4 salt are prepared using electrospinning technique. The maximum ionic conductivity value is obtained to be 9.1 × 10−4 S cm−1 at 298 K for PVA‐PVP‐KClO4 (50‐35‐15) polymer electrolyte system with 15 wt.% KClO4 salt. INTRODUCTION Solid polymer blend electrolytes are scientifically interesting promising materials as electrolytes in advanced solid state electrochemical devices applications such as batteries, electrochemical display devices, smart windows, etc. The solid polymer blend electrolyte has several advantages including high energy density, a solvent free condition, structural stability, light weight, leak proof, good electrode electrolyte contact, ease of fabrication, easy processability and good mechanical properties. OBJECTIVES The present research work deals with the study of composition and conductivity behavior of polymer blend electrolyte complex membranes based on PVA and PVP complexed with different weight percent KClO4 salt, prepared by electrospinning technique. The resultant polymer blend electrolytes have been characterized by XRD, FTIR and AC conductivity studies. METHODS Porous PVA based nanofiber membranes were prepared using a typical electrospinning technique with a horizontal arrangement. A stainless steel needle (24 G, outer diameter: 0.50 mm, inner diameter: 0.35 mm) was connected to an electrode of a high voltage power supply (Spellman, model CZE1000R) which could generate positive DC voltages up to 30 kV and a grounded stainless steel plate was placed at 10 cm distance from the needle tip to collect the nanofiber membranes. RESULTS AND DISCUSSION A novel electrospun polymer electrolyte membranes comprising a blend of poly (vinyl alcohol) (PVA) and poly (vinyl pyrrolidone) (PVP) containing various concentrations of potassium perchlorate KClO4 salt are prepared using electrospinning technique. The structure and complexation of the polymer electrolyte membranes have been confirmed from X‐ray diffraction (XRD) and Fourier transform infrared (FTIR) spectral studies. The ac conductivity studies are performed to measure the ionic conductivity of the polymer electrolyte complex systems in the temperature range 298‐353 K and it is also found that the temperature dependence ionic conductivity data seems to follows the Arrhenius relation. The influence of complex membranes composition on the ionic conductivity has been discussed. The maximum ionic conductivity value is obtained to be 9.1×10−4 S cm−1 at 298 K for PVA‐PVP‐KClO4 (50‐35‐15) polymer system with 15 wt.% KClO4 salt. Scanning electron microscopy studies have been performed and reported. CONCLUSIONS Free standing, flexible complex polymer electrolyte membranes based on various compositions of PVA‐PVP‐KClO4 have been prepared. The presence of amorphous regions due to complexation of polymer salt matrices has been confirmed from XRD and FTIR analysis. The maximum value of ionic conductivity has been obtained to be 9.1 × 10−4 S cm−1 at 298 K for PVA‐PVP‐KClO4 (50‐35‐15) complex polymer electrolyte system with 15 wt.% KClO4. The excellent performance, such as high values of ionic conductivity, of polymer blend electrolyte membranes suggest that the membranes can be used as the best candidate for high performance solid state batteries.

Alkaline solid polymer electrolyte membranes based on structurally modified PVA/PVP with improved alkali stability

Preparation and Properties of Poly(Vinyl Alcohol)/Poly(Vinyl Pyrrolidone) Composites for Solid Alkaline Electrolyte Membranes

PVA-PAA-KOH Alkaline Gel Polymer Electrolyte Membranes

Electrochemical Stability of PVA Alkaline Gel Polymer Electrolyte Membranes

Poly(vinyl alcohol)/poly(acrylamide-co-diallyldimethylammonium chloride) (PVA/PAADDA) composite as novel anion-exchange membranes for potential use in fuel cells

Studies on a novel microporous electrospun poly(vinyl alcohol)‐based polymer electrolyte membranes for high‐performance battery applications

Preparation of PVA-based composite alkaline solid polymer electrolyte with La2O3 nanoparticle filler

Macromolecular reinforcement of alkaline ion-solvating polymer electrolytes

Preparation of Modified PVDF-HFP Polymer Electrolyte Membrane with Alkaline Treatment

Preparation of Alkaline Solid Polymer Electrolyte Based on PVA–TiO2–KOH–H2O and Its Performance in Zn–Ni Battery

Poly(biphenyl piperidinium) Anion Exchange Membranes for Alkaline Water Electrolyzers: The Effect of Nonionic Pendant Groups

Twisted ether-free polymer based alkaline membrane for high-performance water electrolysis

Porous poly(perfluorosulfonic acid) membranes for alkaline water electrolysis

Superhydrophilic polyphenylene sulfide membrane with enhanced ion transfer for alkaline water electrolysis

Tetrazole functionalization: A new strategy toward stable ion-solvating polymer electrolytes for alkaline water electrolysis

Study on single-ion solid-state polymer lithium-ion electrolyte membranes

Facilitating Anion Transport in Polyolefin-Based Anion Exchange Membranes Via Bulky Side Chains.

Preparation and properties of PVDF-Al2O3 micro-porous polymer electrolyte membranes

Dithiol cross-linked polynorbornene-based anion-exchange membranes with high hydroxide conductivity and alkaline stability

Alkaline Solid Polymer Electrolytes Based on PVA-KOH-TiO_2-H_2O

PFAS-Free: Robust and Chemically Stable Ion-Solvating Polymer Membrane Derived from Poly(arylene alkylene) for High-Performance Alkaline Water Electrolysis