Abstract:OBJECTIVE:To explore the effect of changes of processing time on the surface properties of titanium coating formed by micro-arc oxidation (MAO).METHODS:Forty-four disc-shaped pure titanium specimens with 10 mm diameter and 1 mm thickness were equally divided into 4 groups and processed by MAO technique in electrolytes containing 0.2 mol/L calcium acetate (CA) and 0.02 mol/L β-glycerol phosphate disodium salt pentahydrate (β-GP). The processing time were set at 1 min, 5 min, 10 min and 15 min respectively. The topograph of the MAO film surface and the film-substrate interface was observed by a scanning electron microscopy (SEM), and the composition was analyzed by an energy dispersive spectroscope (EDS) incorporated in the SEM. The phase and the microstructure of the film were analyzed by X-ray diffraction (XRD). The roughness of the film was measured using a roughness tester. The surface static contact angle was detected by a contact angle measurement instrument and the surface energy was calculated accordingly.RESULTS:With the increase of processing time from 1 min to 15 min, the pore size increased from (1.30 ± 0.07) µm to (1.55 ± 0.09) µm, and film thickness increased from (10.2 ± 1.1) µm to (20.9 ± 2.9) µm. The content of the Ca in the film increased accordingly, and Ca/P increased from 1.99 to 2.45, and the surface energy increased from 24.62 mJ/m(2) to 39.49 mJ/m(2). Meanwhile, the XRD pattern indicated that rutile increased but anatase and titanium decreased gradually. At the time of 15 min, part of the MAO film peeled off.CONCLUSIONS:Processing time has impact on the thickness, surface topography, crystal component and surface energy of titanium MAO coating. MAO film treated for 5 - 10 min demonstrated favorable surface properties.

Effects of different concentration of calcium and phosphor in electrolytic solution on the properties of containing calcium and phosphor oxide film formed by micro arc oxidation

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

Effect of the change of Ca/P concentration on the mechanical properties of Ti-Alloy micro-arc oxidation coating

Study on Morphologies and Structures of Ceramic Coating Prepared by Micro-Arc Oxidation on TC4 Alloy

Structural characterization of micro-arc oxidation formed titanium dioxide films containing Ca and P

The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface.

Fabricating Electroactive Azobenzene Self-Assembled Monolayers and Their Characterization

Physicochemical properties and surface topography of micro-arc oxidation coating on titanium alloy

Effect of cathode voltage on structure of micro-arc oxidation films of pure titanium

Surface characteristics and structure of oxide films containing Ca and P on Ti substrate

Characteristic of microarc oxidized coatings on titanium alloy formed in electrolytes containing chelate complex and nano-HA

The effect of oxidation time on the micro-arc titanium dioxide surface coating containing Si,Ca and Na

Study on Preparation of Micro-Arc Oxidation Film on TC4 Alloy with Titanium Dioxide Colloid in Electrolyte

Effects of Phytic Acid on Coating Properties Obtained by Micro-arc Oxidation on Mg-Li Alloy

Effect of applied voltage on the structure of microarc oxidized TiO2-based bioceramic films

Porous Films on Surface of Titanium Prepared by Low Voltage Micro Arc Oxidation

The Effect Of Electrolyte Ph Value On The Micro-Arc Oxidation Film Thickness And Bond Strength Of The Titanium

[Effect of Processing Time on the Surface Properties of Titanium Micro-Arc Oxidation Film].

Influence of Applied Voltage on the Structure of Micro-Plasma Oxidized Titania-Based Coatings Formed in an Electrolyte Containing Nano-HA and Calcium Salts and Phosphate

Effects of Electrolyte's Concentration at Micro-Arc Oxide Treatment on the Bonding Strength of Titanium to Porcelain