Abstract:Dedicated control over room temperature is not only a key issue in providing work conditions that ensure employee satisfaction and hence increased work output; it is now a health and safety issue. The design considered the flexibility of using a microcontroller, PIC16F876A along with other peripheral devices such as LM35 temperature sensor, LCD display unit to form all-encompassing single system. In this work the microcontroller was programmed using MP LAB IDE. It accepts inputs from a simple four-key keypad providing users with ease of adaptability and flexibility in selecting desired temperature range of choice. The microcontroller compares the measured room temperature with the reference input. The output from the controller was used to drive a relay through an Opto-coupler which switches between AC and Room Heater according to the control decision. The result obtained was adequate within the scope of the work with 95% accuracy index. The design could be improved upon by making use of silicon-controlled switches (SCS) that are not noisy in operation rather than the electromagnetic relays (EMR) used as actuator in construction of the prototype automatic room temperature reconditioning device. The MATLAB/simulink platform was used to selectively study the behaviour of the two actuators and the SCS has a time-constant of 0.0047 second while the EMR was 0.0094 second.

Temperature controller design for thermostat

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Study on the temperature control system design based on the MCU

[Temperature Measuring and Heating Controlling in Transurethral Prostate Thermotherapy System].

Design and Realization of Temperature Limiter Measurement and Control System

Design of temperature control box of laser rangefinder based on DS18B20

Design of a Temperature Monitoring Alarm System Based on the Microcontroller

Design of a low-fluctuation software-controlled portable thermostat control system

Temperature Control System Based on AT89S52 MCU and Infrared Remote Control

Design and implementation of a room temperature control system: Microcontroller-based

Temperature Measure and Control Design of Air-conditioning System Based on Digital PID

Research of benchtop temperature control system

Multi-channel temperature control system based on three-wire measurement and USB 2.0

Design for Numerical Temperature Control System with Multiple Curves

Design of Temperature Acquisition and Alarm System Based on GSM

Intelligent control and implementation of a new type constant temperature and humidity box

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

The Measure and Control System Design for Temperature and Humidity in General Storeroom

An Arduino-based Low-Cost Hardware for Temperature Control

Design of Temperature Control Circuit for UFPA Based on ADN8830

The Circuit Design of the Mixed and Adjustable Temperature Controller on Bathing