Abstract:In this study, one of the commonly used MXene (Ti3C2Tx) and β nucleated isotactic polypropylene (β-iPP)/MXene composites of different compositions were fabricated. The effects of MXene on non-isothermal crystallization and polymorphic behavior of β-iPP/MXene composites were comparatively studied. The non-isothermal crystallization kinetics indicates that for all samples, the lower cooling rates promote composites to crystallize at higher temperatures. When MXene and β-Nucleating agent (β-NA) are added separately, the crystallization temperature of composites shifts towards higher temperatures at all cooling rates. When MXene and β-NA are added simultaneously, the composite shows different cooling rate dependence, and the effects of improving crystallization temperatures is more obvious under rapid cooling. The activation energy of four samples iPP, iPP/MXene, iPP/β-NA, and iPP/MXene/β-NA were −167.5, −185.5, −233.8, and −218.1 kJ/mol respectively, which agree with the variation tendency of crystallization temperatures. The polymorphic behavior analysis obtained from Differential Scanning calorimetry (DSC) is affected by two factors: the ability to form β-crystals and the thermal stability of β-crystals. Because β-crystals tend to recrystallize to α-crystals below a critical temperature, to eliminate the effect of β-α recrystallization, the melting curves at end temperatures Tend = 50 °C and Tend = 100 °C are comparatively studied. The results show that more thermally unstable β-crystals would participate in β-α recrystallization with higher cooling rates. Moreover, thermal stability of β-crystals is improved by adding MXene. To further verify these findings, samples of three different thermal conditions were synthesized and analyzed by DSC, X-Ray Diffraction (XRD), and Polarized Light Optical Microscopy (PLOM), and the results were consistent with the above findings. New understandings of synthesizing β-iPP/MXene composites with adjustable morphologies and polymorphic behavior were proposed.

Advances in Β-Forms Polypropylene and Β-Nucleating Agents

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Investigation on the Effects of MXene and Β-Nucleating Agent on the Crystallization Behavior of Isotactic Polypropylene

Effects of Α and Β Nucleating Agent Compounds on Properties of Polypropylene

Advances in Research and Applications of DiamideβForm PP Nucleating Agents

Crystalline Modifications and Nucleating Agents for Polypropylene

Exploring the Effects of MXene on Nonisothermal Crystallization and Melting Behavior of Β-Nucleated Isotactic Polypropylene

β-Crystalline polypropylene and its applications

β-Modification in heterogeneous polypropylene for laser-based powder bed fusion of polymers

Advances in research and application of rare earth β-nucleating agents for polypropylene

Advances in research and development of complex nucleating agent for PP

Advances in Research of Aliphatic Dicarboxylic Acid(ADA) and ADA Salt PP β Nucleating Agents

Structure Evolution Upon Heating And Cooling And Its Effects On Nucleation Performance: A Review On Aromatic Amide Beta-Nucleating Agents For Isotactic Polypropylene

Research and Development Progress of the Nucleating Agent for Polypropylene

The α-, β-, and γ-polymorphs of polypropylene–polyethylene random copolymer modified by two kinds of β-nucleating agent

The influence of melt status and beta-nucleation agent distribution on the crystallization of isotactic polypropylene

Effect of rare earth β nucleating agent on the properties of polypropylene

β-Nucleation effects induced by long chain branching polypropylene

Effect Of Beta-Nucleating Agents On Crystallization And Melting Behavior Of Isotactic Polypropylene

Influence of compounded α/β-nucleating agents on the crystallization behavior and mechanical properties of isotactic polypropylene

Progress in Nucleating Agents for Polyamide