Abstract:Fluid catalytic cracking (FCC) is a production process that converts petroleum into petroleum products in the presence of catalysts. The performance of an FCC catalyst plays a decisive role in petroleum refining. An FCC catalyst mainly comprises a molecular sieve (catalytic cracking active center), a carrier, and a binder. The carrier can enable the precracking of the heavy oil in its large pore, which can improve the overall activity of the catalyst and the conversion rate of heavy oil. The surface area and pore structure of carrier materials with different microscopic morphologies differ, which significantly affects the precracking of heavy oil molecules. Therefore, here, FCC catalysts were prepared using flake kaolinite, tubular halloysite, natural flake-tube-combined kaolinite, and mixed kaolinite as support materials, respectively. The FCC catalysts were used in FCC-heavy oil, and the influence of the carrier material morphology on the comprehensive performance of the catalysts was studied. The strength and cracking performance of the catalyst prepared using flake Maoming (M) were poor, whereas the catalyst prepared using tubular halloysite exhibited a good strength, high activity, and a good cracking ability for heavy oil. The catalyst prepared using natural flake-tube combined with Suzhou (S) exhibited a good strength and cracking performance, and it has been widely used in the industrial production of FCC catalysts. When 40% tube-like halloysite was mixed into M, the attrition of the prepared catalyst decreased by 0.5 units, the microreactivity increased by 1.4 units, the gasoline + liquefied petroleum gas (LPG) yield increased by 3.09 percentage points, and the gasoline research octane number (RON) increased by 0.6 units. The comprehensive performance of the catalyst can reach or exceed that of the natural-lamp-tube-based kaolin carrier. The results can not only provide guidance for the stable quality control of kaolin, but they can also significantly alleviate the resource restrictions for FCC catalyst production enterprises.

Characterization of Coke on Spent Catalytic Cracking Catalysts by Integrated Techniques

Effect of the Microstructure of Support Materials on Cracking Catalyst Performance

Characteristics of Pore Structure Evolution of Spent Fcc Catalyst and Its Effect Mechanism on Regeneration at Different Atmospheres

Separation of Catalytic Powder from FCC Slurry Oil by Solvent Extraction and Filtration

Influences of Regeneration Atmospheres on Structural Transformation and Renderability of Fluidized Catalytic Cracking Catalyst

Characterization Of Coke Deposition In The Catalytic Fast Pyrolysis Of Biomass Derivates

From Waste to Best: Excellent Desulfurization Performance of Spent FCC Catalyst

The structure of deposited coke on hydrocracking and reforming catalysts: Coke deactivation and kinetics

Analysis of the Coke Precursor on Bio-oil Refining Catalyst and the Regeneration of the Deactivated Catalyst

Identification of coke species on Fe/USY catalysts used for recycling polyethylene into fuels

Coke Deactivation Kinetics for FCC Gasoline and C4 LPG

Nitrogen Chemistry and Coke Transformation of FCC Coked Catalyst During the Regeneration Process

Analysis for Surface Coke Deposition in Used Mo-Co/-Al2O3 Catalyst for Diesel Hydrodesulfurization

Catalytic Conversion of Biomass-Derivates by in Situ DRIFTS: Evolution of Coke

Analysis of Coke Precursor on Deactivated Catalyst in Bio-Oil Upgrading Process

Evolution of Coke in the Catalytic Conversion of Biomass-Derivates by Combined In-Situ DRIFTS and Ex-Situ Approach: Effect of Functional Structure

Multiscale investigation of pore network heterogeneity and permeability of fluid catalytic cracking (FCC) particles

Application of in situ FTIR to deactivation by coke deposition

A novel approach to CO2 capture in Fluid Catalytic Cracking—Chemical Looping Combustion

Coke Formation in the Catalytic Cracking of Bio‐oil Model Compounds