Abstract:This paper examines the potential for synergistic benefits of co-utilizing three waste streams of pinewood, spent fluid catalytic cracking (sFCC) catalyst, and waste CO 2 via thermochemical conversion. For this, a lab-scale fixed-bed semi-batch scale reactor facility is utilized to investigate the impact of using sFCC catalyst and its reusability on the syngas output, quality, and energy during pyrolysis and CO 2 -assisted gasification of pinewood 800–900 °C. Results are reported on the pyrolysis and CO 2 -assisted gasification of pinewood, as well as the impact of using sFCC catalyst and its reusability on syngas output, quality, and energy. Incorporating the catalyst without direct contact with the solid feedstock resulted in syngas enhancement and reusing this catalyst led to <5 wt% char formation from the gasification at 900 °C. The addition of FCC catalyst improved the total CO yield and its rate with an increase in temperature due to improved cracking of volatiles and their simultaneous reforming using CO 2 . In addition, the syngas and energy yields decreased when the catalyst was in direct contact with the solid biomass which also acted as a barrier between the feedstock and gasifying agent, leading to lower CO production. Catalytic gasification at 900 °C using CO 2 provided combustible gas output that was 1.4 times higher than the feedstock mass which suggests that at least 0.4 g of CO 2 consumption for combustible gases, such as H 2 and CO. This points to the synergistic potential in co-utilization of waste streams of biomass, spent FCC catalyst, and CO 2 that provided not only waste management and energy recovery but also energy efficient carbon sequestration. Temperature programmed oxidation of the char residue left from the pyrolysis and gasification tests and coke that forms on the sFCC catalyst revealed conversion of about 0.1 g of the feedstock to coke that was significantly more resistant to oxidation than the char formed.

Waste to treasure: Reutilization of FCC coke block as photothermal conversion material for water evaporation

Solid waste reutilization of FCC petroleum coke for solar evaporation as a photothermal conversion material

Petroleum Coke Embedded in Cigarette Butts: All Waste-Derived Solar Evaporator for Effective Water Evaporation

CO2 Footprint of Thermal Versus Photothermal CO2 Catalysis.

Utilization of Block Copolymers to Understand Water Vaporization Enthalpy Reduction in Uniform Pores

Upcycling Waste Poly(ethylene terephthalate) into a Porous Carbon Cuboid through a MOF-Derived Carbonization Strategy for Interfacial Solar-Driven Water–Thermoelectricity Cogeneration

Spent fluid catalytic cracking (FCC) catalyst enhances pyrolysis of refinery waste activated sludge

From Waste to Best: Excellent Desulfurization Performance of Spent FCC Catalyst

Purifying coke-coolin wastewater

A Coke Deposition Self‐removal TBCC Thermal Management with Multi‐catalyst Coating

Facilitation of coke gasification by coking wastewater and its degradation properties in thermochemical reactions

Experimental investigation on waste heat reutilization of calcined petroleum coke

Valorization of fluid petroleum coke for efficient catalytic destruction of biomass gasification tar

Research on the hydrothermal regeneration of powdered activated coke in wastewater treatment

Engineering practice: Purifying coke-cooling wastewater

Role of spent FCC catalyst in pyrolysis and CO 2 -assisted gasification of pinewood

A novel approach to CO2 capture in Fluid Catalytic Cracking—Chemical Looping Combustion

Study on the pyrolysis treatment of HPF desulfurization wastewater using high-temperature waste heat from the raw gas from a coke oven riser

A novel renewable collector from waste fried oil and its application in coal combustion residuals decarbonization

Reuse of spent FCC catalyst, waste serpentine and kiln rollers waste for synthesis of cordierite and cordierite-mullite ceramics