Abstract:This paper focused on research which systematically classified 14 raw coals from different geological areas of China in accordance with ash constituents, and explained the reasons why the blended coals are slagging with the help of phase diagrams of ceramics. According to mineral composition of raw coal, we proposed the theory of melting characteristic of blended coals and discussed the approaches of making the ash fusion temperature (AFT) of blended coals higher by selecting suitable raw coals. Meanwhile, we created a judgment to characterize the effects of coal blending:T-φ diagrams (y-axis T represents softening temperature of AFT, x-axis φ represents the temperature difference between the blended coal and low AFT coal and according to these two parameters, we can judge blending effect from the place where the blended coal sited in the diagram). This paper regarded AFT as a criterion to estimate slagging propensities. Results show that: as coal blending leads to the result that the ingredients of ash are much more complex and low- temperature eutectic will easily occur, thus coal blending is generally a process for decreasing AFT or aggravating slagging. However, we find that classification of raw coal and scientific blending with raw coal of different categories can weaken slagging propensity. Coal-blending associated with the high-AFT raw coals which is rich in boehmite will ensure AFT rise; but there are no such cases when coals are blended with other high-AFT raw coals; the AFT of blended coals mixed with medium-AFT and low-AFT raw coals is decreasing consistently; coals blended with two low-AFT coals never make AFT higher.

APPLICATION OF THREE-ELEMENT PHASE DIAGRAM IN STUDY ON SLAGGING BEHAVIOR OF BLENDED COAL

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

INFLUENCE OF COAL-BLENDING UPON SULFER-RETENTION BEHAVIOR OF THE COAL PROPER

Experiment research of anthracite coal mixed burning in boiler

A prediction method of slagging behavior for pulverized coal by using test method of sedimendation furnace

PREDICTION OF BURNING BEHAVIOR FOR PULVERIZED COAL AND ITS APPLICATION ON PRACTICAL BOILERS

Research on the Slagging Characteristics of Blended Coals in A Pilot-Scale Furnace

Analysis of Coal Ash Fusion Characteristics of High Fusibnity Coal Blending with Low's with Ternary Phase Diagram

Study on the combustion characteristics and slagging characteristics of blended coal mixed from anthracite and bitumite

Study on Coal Ash Fusion Characteristics with TG-DSC Method

Research on the Ash Fusion Characteristic of Blending Coal Based on Systematic Classification

Effect of CO2 atmosphere on Ca-containing mineral transformation behaviors during a Ca dominated coal co-firing with a Si/Al dominated coal in oxy-fuel condition

The Melting and Transformation Characteristics of Minerals During Co-Combustion of Coal with Different Sludges

Pore Characteristics and Slurryability of Coal Blends

Effect of Ca3(PO4)2 additive on the slagging behavior during the cofiring of high‐sodium coal and iron-rich coal

Effect of Purified Dust from CaC2 Production and Bottom Ashes/slags on Slagging Characteristic of Zhundong Coal Blend

Study on the Coal Ash Fusibility During Blending Coal Combusition

Investigation on Coal Properties and Combustion Characteristics of Blended Coals

Improvement of the Coal Ash Slagging Tendency by Coal Washing and Additive Blending with Mullite Generation

Numerical Simulation on Burning Blended Coal Slime Under the Condition of Low Load in W-flame Boiler

Design and Optimization on Complex Flux of Coal Gasification Based on Material Blending Experiment