Abstract:This study explores the application of the half-bridge Inductor-Inductor-Capacitor (LLC) resonant converter in Light Emitting Diode (LED) lighting driver power supplies, with a specific focus on improving efficiency and dimming capabilities. The investigation begins with an analysis of the sliding mode control (SMC) method, utilizing a constant-current design with a fixed switching frequency (FWF). A novel fuzzy frequency-selective SMC dimming strategy is proposed to recognize the challenge of significant output voltage ripple during dimming under a FSF. To address the ripple issue during dimming, an electromagnetic filtering circuit is designed, and a zero-voltage turn-on Metal—Oxide—Semiconductor (MOS) tube is introduced, incorporating a synchronous rectification scheme to mitigate losses in the secondary-side rectification diode. The study comprehensively considers a current-mode self-driven method, specifically tailored to the LLC circuit’s different operating modes. The LLC resonant circuit, along with the subsequent synchronous rectification circuit, is meticulously designed for a 252 W LED driver power supply prototype. A closed-loop simulation circuit model is developed using PSIM software in experimental validation. The feasibility of SMC based on a FSF is affirmed through a comparative analysis of SMC signal waveforms, steady-state output current (OC) models, and resonant tank current waveforms. The investigation into the OC under various SMC conditions demonstrates the half-bridge LLC resonant converter’s ability to achieve stable output with minimal ripple. The designed LED lighting circuit is applied to indoor design, providing adjustable LED brightness and switch status at different power levels. Although obstacles slightly impact the communication quality of the circuit, it remains suitable for the majority of users’ needs.

A Novel Design of Single-stage High-power LED AC/DC Resonance Driver

A Single-Stage Primary Side Controlled Flyback LED Driver

An Electrolytic-Capacitorless And Inductorless Ac Direct Led Driver With Power Compensation

A primary side controlled single-stage flyback LED driver with high power factor and high accuracy

High-reliability and High-Efficiency White LED Driver with High Voltage Supply

A Staby and Design of the High Effideney and Nigh Voltage Driver of the White Light LED

A linear constant current LED driver without off-chip inductor and capacitor

A High Efficiency Step-Up WLED Driver with Wide Range PWM Dimming

A Dimmable and Power-Compensated AC Direct LED Driver with High Efficiency

A Novel Integrated Electronic Lighting Driver Circuit for Supplying an LED Projection Lamp with High Power Factor and Soft Switching Characteristics

Analysis and Design Considerations for A High Power Buck Derived Led Driver with Extended Output Voltage and Low Total Harmonic Distortion

A Capacitorless and Low‐Optical‐Flicker AC Direct LED Driving IC and System Applied to Street Lighting

A High Power Buck Derived Non-Isolated Ac/Dc Led Driver

Analysis and Design Considerations for an Improved BCM Buck Ac-Dc LED Driver with High Output Voltage and Low Total Harmonic Distortation

Design of LED driver with LLC resonant converter and quasi-resonant PWM constant current control strategy

An AC-DC LED Integrated Streetlight Driver with Power Factor Correction and Soft-Switching Functions

High input voltage single-stage flyback AC/DC LED driver using series-connected MOSFETs

Asymmetric Pwm Controlled Llcc Resonant Half Bridge Dual Outputs Led Driver

Design and Analysis of Highly Efficient Led Power Supply with Pfc-LLC Topology

Analysis and design considerations of two-stage AC-DC LED driver without electrolytic capacitor

High-Performance Light Emitting Diode Lighting Circuits and Their Interior Design Applications