Abstract:The new power system with increasingly high renewable energy proportion necessitates the combined heating and power (CHP) generation units to provide more flexibility. With full consideration of operation characteristics, this paper firstly proposes an advanced coal-fired CHP-CAES system consisting of a 350 MW coal-fired CHP unit and a 30 MW CAES system, which realizes more efficient energy utilization and enhances the system adjusting flexibility through thermal cycles integration and energy comprehensive utilization. The thermodynamic models and multi-dimensional performance analysis models are separately established. Based on that, the comparative study is conducted for two CHP-CAES configurations and the stand-alone CHP unit. With 80% heating load, the minimum power ratio is lowered by 11.69% rated power and the maximum power output is increased by 6.35% rated power, and 27.26 tons of coal can be saved for a single cycle compared with the stand-alone CHP unit. The results also demonstrate that the system still has superiority when the load ratio changes. Techno-economic evaluations for a typical application scene show that the dynamic payback period of the proposed system is shortened by 10.41 years compared with the reference separate CHP-CAES system. These results show that the proposed system presents better performance in energy utilization, enhancing flexibility, realizing clean and low-carbon heating as well as techno-economics. In addition, parametric analysis is implemented to find the influence of CAES parameters on the system. It is found that increasing the expander inlet temperature and air storage pressure can further enhance the system round-trip performance. Yet, the investment cost increases greatly for higher storage pressure and the payback period will be lengthened. Furthermore, the system advantages are strengthened with a CAES system of greater capacity. Nevertheless, we find that the deep coupling in the thermodynamic cycle of the two systems results in an upper capacity for the integrated CAES system, and it is nearly 35 MW for the studied system. These regularities and conclusions can provide theoretical guides and directions for the customized CAES system design with the purpose to integrate with a coal-fired CHP unit.

System Study for a Tens MWe Size Coal—Fired MHD Retrofit Pilot Power Plant in China

ANALYSIS OF RETROFITTING SCHEME FOR A COMBINED CYCLE WITH BOILER USING EXHAUST GAS FOR SUPPORTING COMBUSTION

Circulating Efficiency Test of Domestic 600MW Units and Their Performance Optimization Analysis

Parameters analysis of 600 MW + 120 MW peak load unit by integrated generate technology

Optimization adjustment of pulverizing system for a 600 MW unit boiler burning mixed inferior coal

Advanced Exergoenvironmental Evaluation for a Coal-Fired Power Plant of Near-Zero Air Pollutant Emission

Research on Technical Route Optimization and Energy-saving Characteristics of High-temperature Subcritical Retrofit

Study on Conventional Island Retrofit Strategies for Converting Coal-Fired Power Plants to Nuclear Power Stations in China

Combustion System Renovation of 125MW Unit for Enhancing Coal Suitability and the Influence on NOx Emission

Development Of Gas Steam And Power Multi-Generation System

Experimental study of sludge disposal in a large coal-fired power plant

Economic Assessment of Coal-Fired Power Unit Decarbonization Retrofit with High-Temperature Gas-Cooled Reactors

Thermodynamics, flexibility and techno-economics assessment of a novel integration of coal-fired combined heating and power generation unit and compressed air energy storage

Research and Development on PFBC-CC in China and Jiawang Pilot Plant Project

Performance Analysis of a 300 MW Coal-Fired Power Unit during the Transient Processes for Peak Shaving

A case study of digital-twin-modelling analysis on power-plant-performance optimizations

A novel system for reducing power plant electricity consumption and enhancing deep peak-load capability

Optimization and Analysis of Combined Heat and Water Production System Based on a Coal-Fired Power Plant

Safety and thermal efficiency performance assessment of solar aided coal-fired power plant based on turbine steam double reheat

Design and Performance Analysis of Main Steam Coupled with Electric Heating Molten Salt Energy Storage System for Coal-Fired Power Plant

Thermodynamic analysis of the coal-fired combined heat and power units integrated with steam ejectors and thermal storage