Abstract:A 2D (axisymmetric) computational study of the discharge characteristics of an atmospheric pressure plasma jet as a function of gas flow rate was performed. The helium jet emerged from a dielectric tube, with an average gas flow velocity in the range 2.5–20 m s−1 (1 atm, 300 K) in a nitrogen ambient, and impinged on a substrate a short distance dowstream. The effect of the substrate conductivity (conductror versus insulator) was also studied. Whenever possible, simulation predictions were compared with published experimental observations. Discharge ignition and propagation in the dielectric tube were hardly affected by the He gas flow velocity. Most properties of the plasma jet, however, depended sensitively on the He gas flow velocity, which determined the concentration distributions of helium and nitrogen in the mixing layer forming in the gap between the tube exit and the substrate. At low gas flow velocity, the plasma jet evolved from a hollow (donut-shaped) feature to one where the maximum of electron density was on axis. When the gas flow velocity was high, the plasma jet maintained its hollow structure until it struck the substrate. For a conductive substrate, the radial ion fluxes to the surface were relatively uniform over a radius of ~0.4–0.8 mm, and the dominant ion flux was that of He+. For a dielectric substrate, the radial ion fluxes to the surface peaked on the symmetry axis at low He gas flow velocity, but a hollow ion flux distribution was observed at high gas flow velocity. At the same time, the main ion flux switched from to as the He gas flow velocity increased from a low to a high value. The diameter of the plasma 'footprint' on the substrate first increased with increasing He gas flow velocity, and eventually saturated with further increases in velocity.

Characteristics of atmospheric pressure plasma jets emerging into ambient air and helium

Glow-Like Helium and Filament-Like Argon Plasma Jets of Using a Dielectric Barrier Configuration at Atmospheric Pressure

Atmospheric-Pressure Dielectric Barrier Plasma Jets Elongated by Elevating External Electric Field

Effects of Penning ionization on the discharge patterns of atmospheric pressure plasma jets

Interplay of Discharge and Gas Flow in Atmospheric Pressure Plasma Jets

Investigation Of Helium Atmospheric Pressure Plasma Jet By Schlieren Visualization

Experimental study of a microsecond-pulsed cold plasma jet

Influence of nitrogen and oxygen admixture on the development of helium atmospheric-pressure plasma jet

Numerical study of discharge characteristics of an atmospheric pressure plasma jet with a coaxial dual-channel inlet

Effects of Gas Flow Rate on the Length of Atmospheric Pressure Nonequilibrium Plasma Jets

Role of Metastable Atoms in the Propagation of Atmospheric Pressure Dielectric Barrier Discharge Jets

Evaluations of Electron Density and Temperature in Atmospheric-Pressure Radio-Frequency Helium Plasma Jet

Formation Mechanism of Atmospheric Pressure Plasma Jet

On the gas heating effect of helium atmospheric pressure plasma jet

Investigation on the Streamer Propagation in Atmospheric Pressure Helium Plasma Jet by the Capacitive Probe

Influence of structural parameters of needle-ring electrode on the length of argon plasma jet under atmospheric pressure

An Atmospheric Pressure Quasiuniform Planar Plasma Jet Generated By Using A Dielectric Barrier Configuration

Helium atmospheric pressure plasma jets touching dielectric and metal surfaces

Stepwise development of atmospheric pressure plasma jet driven by bursts of high-voltage nanosecond pulses at multi-tens MHz

Gas flow rate dependence of the discharge characteristics of a helium atmospheric pressure plasma jet interacting with a substrate

Numerical study of the interaction of a helium atmospheric pressure plasma jet with a dielectric material