Abstract:The Brinkman model is used for the theoretical study of boundary effects in a natural convection porous layer adjacent to a semi-infinite vertical plate with a power law variation of wall temperature, i.e.T̄wαx̄λ. It is shown that the dimensionless governing equations based on this model contain two parameters ϵ, = (Ra)−12 and σ = (Da/φ)12 where Ra and Da are the Rayleigh number and the Darcy number based on a reference length and φ is the porosity. For the limit of ϵ → 0, σ → 0 and σ ⪡ ϵ, a perturbation solution for the problem is obtained based on the method of matched asymptotic expansions. The physical problem can then be visualized to be consisting of three layers : an inner viscous sublayer, adjacent to the heated surface, with a thickness of the order of 0(σ) ; a middle thermal layer of thickness of the order of 0(ϵ) ; and the outer potential flow region with thickness of the order of 0(1). It is found that the first-order problem of the thermal layer is identical to that based on Darcy's law with slip flow, whose solution was obtained previously. Composite solutions for stream function and temperature, uniformly valid everywhere in the flow field, are constructed from the solutions for the thermal layer and the viscous sublayer. A new parameter Pnx, defined as Pnx = (RaxDax)12 with Rax and Dax denoting the local Rayleigh number and the local Darcy number based on x̄, is found to be a measure of the boundary effect. It is shown that the viscous effect on the boundary has a drastic effect on the streamwise velocity component near the wall with a lesser effect on heat transfer characteristics. The boundary effect slows down the buoyancy-induced flow with a resulting decrease in heat transfer. The local Nusselt number is found to be of the form Nux(Rax)12 = C1− C2Pnx where the values of C1 and C2 depending on λ. For an isothermal vertical plate (λ = 0), the first-order correction to the local Nusselt number is identically zero, i.e. C2 = 0. In general, the boundary effect on the local Nusselt number becomes more pronounced as the value of Pnx, Rax or Dax is increased.

Capillary-induced Rewetting in a Flat Porous Cove Layer

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Variable Permeability Effects on Natural Convection in a Vertical Porous Layer with Uniform Heat Flux from the Side

Forced dewetting on porous media

Evaporation Limited Radial Capillary Penetration in Porous Media.

Evaporation-Induced Capillary Siphoning Through Hydraulically Connected Porous Domains: The Vedernikov–Bouwer Model Revisited

On the Wetting Mechanism of Liquid Flow on Hot Surfaces

Heat Transfer of Laminar Flow over a Plate Embedded in Porous Medium with a Constant Heat Flux under Local Non-Equilibrium Condition

Transient free convection about a vertical flat plate embedded in a porous medium

Buoyancy-induced Flows and Phase-Change Heat Transfer in a Vertical Capillary Structure with Symmetric Heating

Capillary rise and evaporation of a liquid in a corner between a plane and a cylinder: A model of imbibition into a nanofiber mat coating

The Brinkman Model for Natural Convection about a Semi-Infinite Vertical Flat Plate in a Porous Medium

Role of Trapped Liquid in Flow Boiling Inside Micro-Porous Structures: Pore-Scale Visualization and Heat Transfer Enhancement.

Capillary-assisted Flow and Evaporation Inside Circumferential Rectangular Micro Groove

Tuning Capillary Penetration in Porous Media: Combining Geometrical and Evaporation Effects

Experimental Investigation of Bottom Reflooding and Modeling of Quench Velocity in a Narrow Rectangular Channel

Numerical Simulation of Leidenfrost Effect of Droplets on Porous Substrate

A heat transfer model for liquid film boiling on micro-structured surfaces

Heat and Mass Transfer in the Porous Wick of a Capillary Evaporator

Bottom Reflooding Experiments in a Thin Rectangular Channel

BOILING HEAT TRANSFER ON SURFACES COATED BY POROUS WICK WITH VAPOR CHANNELS