Abstract:Image 1 Microchips are intensively used in almost all nowadays electronic devices. With the continuous advancement of our technologies, they get smaller in size than ever before. They generate high-intensity heat loads that need to be transported effectively such that they may function properly. Heat pipes have proven to be very effective in transporting relatively large heat loads from miniature components. They are of seamless structure that involves a working fluid capable of evaporation and condensation at the working temperature of the electronic chips. The working fluid is derived to move from the condenser to the evaporator via multiple microgrooves using capillary forces. It is important that the condensate reaches the evaporator at a proper rate such that no dry-out or flooding occur. In this work, we are particularly interested in the case of capillary-driven flows in rectangular microchannels. A generalized model is developed that works for axe-symmetric rectangular channels of arbitrary, moderately varying width profiles. It also accounts for any contrast of viscosity between the liquid and the vapor under isothermal conditions. The model shows to reduce to the special case of imbibition in straight and uniform microchannels, for which comparisons with experimental and modeling works show an excellent match. Cases representing linearly and quadratically varying converging/diverging width profiles have been explored. It is found that the viscosity ratio has a significant influence on the rate at which the meniscus advances. The model also negates the common practice found in the literature of using the formula developed for imbibition rates in capillary tubes for rectangular microchannels by replacing the diameter of the tube with the hydraulic diameter. It is also found that the channel profile has an influential effect on the imbibition rates. For tapered microchannels, the capillary force increases along the channel length while it decreases for diverging ones. It is interestingly demonstrated that, for quadratically tapered microchannel, the speed of the meniscus increases towards the end of the microchannel compared with linearly varying microchannels. On the other hand, for diverging microchannels, the speed of the meniscus decreases due to the increase in the cross-sectional area. Computational fluid dynamics (CFD) analysis has been conducted to provide a framework for confirmation and verification for which very good match has been established, which builds confidence in the modeling approach.

Capillary-assisted Flow and Evaporation Inside Circumferential Rectangular Micro Groove

Close-contact Melting of Shear-Thinning Fluids

Numerical investigation of heat and mass transfer from an evaporating meniscus in a heated open groove

Theoretical analysis of annular film flow evaporation inside microfin tube

Capillary flow of evaporating liquid solutions in open rectangular microchannels

Experimental Investigation of Capillary-Assisted Evaporation on the Outside Surface of Horizontal Tubes

A modeling approach for capillary-driven flow of a wetting fluid in a rectangular open microchannel of arbitrary axisymmetric width profile: Application to heat pipes

Evaporation Heat Transfer of Thin Liquid Film and Meniscus in Micro Capillary and on Substrate with Nanorelief

A Numerical Investigation on Micro Particle Dynamics Near an Evaporating Meniscus

Numerical Gas-Liquid Stratified Flow Regime Model On Evaporation Heat Transfer In Horizontal Microfin Tubes

Thin liquid film flow and heat transfer under spray impingement

An analysis of flow characteristics during ethanol natural evaporation in capillary tubes with varying diameters

THEORETICAL MODEL OF EVAPORATION HEAT TRANSFER BASED ON GAS-LIQUID ANNULAR FLOW OF HORIZONTAL MICROFIN TUBE

Mathematical Model and Numerical Simulation of Flow and Heat Transfer in LHP's Capillary Wick with Azimuthal Vapor Grooves

Characteristics of an Evaporating Thin Film in a Microchannel

Heat transfer with flow and evaporation in loop heat pipe’s wick at low or moderate heat fluxes

Evaporative annular flow in micro/minichannels: A simple heat transfer model

Internal Flow in Evaporating Droplet on Heated Solid Surface

Interplay of capillary and Marangoni flows in micropillar evaporation

Slip and Micro Flow Characteristics Near A Wall of Evaporating Thin Films in A Micro Channel

Numerical Simulation of Silicon Micro Flat Heat Pipes with Axial Triangle Grooves