Abstract:The thermoplastic polyurethane elastomer (TPU) was firstly synthesized by using polybutylene adipate (PBA) as soft segments, methane-4-4’-diisocyanate(MDI) and 1,4–butanediol(BDO) as hard segments. The polyurethane hot-melt adhesive was then prepared by adding the tackifying resin, filler and other auxiliaries into the TPU matrix. The structure of the synthetic products was characterized by Infrared Spectrum and the thermal properties and microstructure of polyurethane hot-melt adhesive was tested by the thermogravimetric(TG) and the scanning electron microscopy(SEM), respectively. The results showed that the thermoplastic polyurethane elastomer had the expected structure, the shear strength of polyurethane hot-melt adhesive increased with the pentaerythritol abietate content increasing when the addition of the pentaerythritol abietate is less than 20 wt%, and decreased with the content of CaCO 3 filler and petroleum resin increasing, respectively; the thermal stability was improved, and the char yields of the polyurethane blends increased with adding the filler CaCO 3 . When the molar ratio of PBA:MDI:BDO was 1:2:1, the addition of pentaerythritol abietate and filler CaCO 3 was 20 wt% and 30 wt%, the comprehensive performance of PU hot-melt adhesive was better and the shear strength was 7.37 MPa.

Research Progress of Thermoplastic Elastomer Hot-Melt Pressure Sensitive Adhesives

Present Situation of Application and Development of Hot- Melt Pressure Sensitive Adhesives

Research Advancement in Pressure-Sensitive Adhesives

Research Progress of Emulsion Adhesives

Data Analysis on Adhesive Property Testing Methods of Hot-melt Pressure-sensitive Adhesive with Styrene Thermoplastic Elastomer

Research progress in polymerization methods of emulsion acrylic acid pressure sensitive adhesive

Modification Research on the Peel Strength of the Acrylate Emulsion Pressure-Sensitive Adhesives (vol 131, 40095, 2014)

Study on Rheological Behavior of APAO Hot-melt Pressure Sensitive Adhesive

Reversible Dry Micro-Fibrillar Adhesives with Thermally Controllable Adhesion

Test Research on Water Resistant Performance of Hot Melt Adhesive in Plastic Pipe Reinforced by Cross-winding Steel Wires

Study on Preparation and Property of Hot Melt Pressure Sensitive Adhesive Used for Labels

Effect of reactive plasticizer and UV radiation on the properties of hot melt pressure sensitive adhesive

New Developments and Applications in Hot- Melt Adhesives

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive

Recent developments for thermoplastic elastomer

Improved methods and progress of emulsion acrylic acid pressure sensitive adhesive

Release Characterization of Drugs in Hot-melt Pressure Sensitive Adhesive

Study on Preparation of Epoxidized SDS Based-Hot Melt Pressure Sensitive Adhesives and Its Adhesion Properties

Study on the Preparation of Modified Acrylic Ester Copolymer Pressure - Sensitive Adhesive

Progress in the adhesive for PE

Study on Preparation and Properties of Polyester Hot Melt Adhesive for Electronic Industry