Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Determining the Characteristics of A Self-Excited Oscillation in Rotor/Stator Systems from the Interaction of Linear and Nonlinear Normal Modes

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Bifurcation Behavior of a Flexible Rotor Supported on Nonlinear Squeeze Film Dampers Without Centralized Springs

DYNAMIC BEHAVIOUR OF A ROTOR PARTIALLY FILLED WITH FLUID IN THE UNSTABLE REGION

Modal Characteristics Analysis of a Variable-Speed Pump-Turbine Rotor System: a Perspective of Resonance

Nonlinear Vibration Characteristics and Bifurcations of a Rotor System Subjected to Brush Seal Forces

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Periodic Motion And Bifurcation In Self-Excited Oscillation System Due To Dry Friction

Nonlinear Dynamic Analysis of a Rigid Rotor Supported By a Spiral-Grooved Opposed-Hemisphere Gas Bearing

Stability analysis of a rotor system with electromechanically coupled boundary conditions under periodic axial load

Nonlinear motion cascade to chaos in a rotor system based on energy transfer

Analysis of Reverse Whirl Characteristics of a Rub-Impact Rotor System

Nonlinear dynamics of a rotor–stator system with contacts

On -DOF active dampers to suppress multistability vibration of a -DOF rotor model subjected to simultaneous multiparametric and external harmonic excitations

Predicting the Frequency of the Rotor Whirl Excited by Semi-Floating Ring Bearing

Nonlinear Dynamic Analysis of a Rotor/bearing/seal System

Dynamic Analysis of Rotor'S Radial Rub-Impact in Full Degrees of Freedom Accounting for Turborotor'S Non-Linear Clearance-Excitation Force

Influencing Parameters Analysis On Dynamics Characteristic Of A Double-Span Rotor System

Nonlinear dynamic characteristic analysis of a vertical mass unbalanced rotor