Abstract:The rotor unbalance is a major source of rotor vibrations. Rotor vibrations often produce many undesired effects like noise, wear and fatigue, etc. In this paper, we try to seek the benchmark solutions for the unbalance responses of complex rotor-bearing system. The presented approach could be seen as the extension of transfer matrix method (TMM) in some sense. For the TMM, a disk or supporting structure cut off one uniform shaft element into two and someone must use the compatibility condition between these two new elements to derive the transitive matrix. However, for the presented approach, it directly solves the governing equations of uniform shaft elements with consideration of the effects of disks and supporting structures. Thus, this analytical approach is advantageous in reducing the times of matrix multiplication between state matrices and field matrices. One only needs to calculate the inversion of 16 × 16 dynamic stiffness matrix to find the steady state response. It saves the computer memory and is easy to be programmed. In addition, this analytical approach avoids the problems of selecting optimal discretization mesh densities in the case of FEM applications. For arbitrary linear boundary condition, the benchmark solutions are always easy to be obtained. The numerical simulation is carried out and two numerical examples are given to validate the new solutions. In which the finite element method is used as the numerical approach. Simulation results show that the benchmark solutions match very well with the FEM results. The effects of anisotropy in the supporting structures on the rotor's dynamic behavior, which are observed in this work, are also in accordance with many references. This validates the benchmark solutions further.

Nonlinear dynamic characteristic analysis of a vertical mass unbalanced rotor

Numerical Analysis of Coupled Lateral and Torsional Vibrations of A Vertical Unbalanced Rotor

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Vibration characteristics analysis of a rotor for a permanent magnet motor with Air-Gap Eccentricity

Nonlinear Analysis of Stability and Rotational Accuracy of an Unbalanced Rotor Supported by Aerostatic Journal Bearings

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

The coupled bending-torsional dynamic behavior in the rotating machinery: modeling, simulation and experiment validation

Nonlinear Dynamic Behaviors of an Imbalance Rotor on Multi-Lobe Bearings

External and internal coupling effects of rotor's bending and torsional vibrations under unbalances

General dynamic model of aeroengine's rotor system during maneuvering flight

Nonlinear Dynamic Analysis of a Rotor/bearing/seal System

Study on Nonlinear Dynamic Response of an Unbalanced Rotor Supported on Ball Bearing

Dynamic Characteristics Analysis of Magnetic Levitation Rotor Considering Unbalanced Magnetic Pull

Benchmark solutions for the dynamic analysis of general rotor-bearing system with arbitrary linear boundary conditions

Nonlinear Dynamic Analysis of Rotor-Bearing System with Cubic Nonlinearity

Nonlinear vibration and dynamic stability analysis of rotor-blade system with nonlinear supports

Nonlinear Dynamic Analysis of a Rigid Rotor Supported By a Spiral-Grooved Opposed-Hemisphere Gas Bearing

Analysis of the Coupled Flexural-Torsional Vibrations of Rotary Shaft Systems

Nonlinear Dynamic Modeling of a Simple Flexible Rotor System Subjected to Time-Variable Base Motions