Abstract:Combining the first-order ordinary differential equations of pump and laser power and the second-order ordinary differential equation of temperature, an optical model for diode-pumped alkali vapor lasers in two pumped configurations, is reported. This model, taking into account the axial distributions of pump and laser beam radii and the radial distributions of intensities and temperature, shows good agreement between the calculated and experimental results. An observed maximum temperature rise of similar to 58 K corresponding to a pump power of 20 W is reproduced, and a wide region of heat source density of quenching is predicted by the model. The heat production of relaxation and of quenching are demonstrated to be within an order of magnitude, indicating that quenching is as important as relaxation in the temperature calculation. It can also be deduced that the peak of the temperature profile is mainly dominated by relaxation, whereas its width can be attributed to thermal diffusion and quenching. In addition, dependencies of laser and thermal power on the pump beam waist are calculated, and an optimal ratio of 0.7 between the pump and laser beam waist is obtained.

A New Model of Calculating Miniature Optically Pumped Far-Infrared Laser

A kinetic model for optically pumped cesium vapor laser

Modeling of Kinetic and Thermodynamic Processes in a Flowing Exciplex Pumped Alkali Vapor Laser

Modeling of Steady-State Temperature Distribution in Diode-Pumped Alkali Vapor Lasers: Analysis of the Experimental Results

Hyperfine Spectrum Measurement of an Optically Pumped Far-Infrared Laser with a Michelson Interferometer

Amplification Assisted Optical Parametric Oscillator in the Mid-Infrared Region

Numerical Modeling of 3.5 micron Dual-Wavelength Pumped Erbium Doped Mid-Infrared Fiber Lasers

Theoretical and Experimental Studies on Ch3oh Thz Laser Pumped by Pulse Carbon Dioxide Laser

A new theoretical model of optical pumped solid-state laser

Simulation analyses and configuration optimizations of an LD pumped 3.1 μm Co/Er:PbF 2 MIR laser

Theoretical and Experimental Study on the Intracavity Optical Parametric Oscillator Pumped in A Raman Laser

Numerical Model of an Er3+-Tm3+-Pr3+-codoped Fiber Amplifier Pumped with an 800 Nm Laser Diode.

Upgrade of far-infrared laser-based Faraday rotation measurement on MST.

Optically Pumped Pulsed FIR Laser Using a Q-switched CO2 Laser Pump

Numerical Simulation and Optimization of 3.5 Μm Erbium-Doped ZrF4 Fiber Laser Pumped at 655 and 1981 Nm

Theoretical Study and Optimization of A High Power Mid-Infrared Erbium-Doped Zblan Fibre Laser

Theoretical Design of 100-Terawatt-level Mid-Infrared Laser

Numerical Study of a Bi-Directional In-Band Pumped Dysprosium-Doped Fluoride Fiber Laser at 3.2 Μm

Inter-pulse Spectroscopy Based on Room-Temperature Pulsed Quantum-Cascade Laser

Spectra- and Temperature-Dependent Dynamics of Directly End-Pumped Holmium Lasers

Numerical modeling of the self-similar mode-locked Er3+-doped fluoride fiber laser around 3 μm