Abstract:Modern industry has become increasingly reliant on composite materials for a variety of applications, and the nuclear industry is no exception to this. Among the materials being researched as Enhanced Accident Tolerant Fuels, ceramic matrix composites such as SiC-fiber-reinforced SiC (SiCf/SiC) figure as some prime candidates due to their excellent high temperature performances. SiCf/SiC so far shows adequate nuclear, mechanical and chemical properties; still, the thermal properties need further investigation. The thermal behavior of a material is an important factor for its performance as a nuclear fuel cladding, i.e. the first barrier encapsulating the fuel pellets. Many features determine the resulting properties of composite materials, such as matrix and fiber reinforcement properties and orientation, void fraction, and pore morphology. This study establishes a methodology to study the physical properties of composite materials and applies it to SiCf/SiC. A FEM model is used to characterize the thermal properties of a fundamental SiCf/SiC element, referred to as a �unit cell�, with the objective of accurately predicting the thermal properties of this complex class of materials where experimental data is often difficult to obtain. The unit cell is built based on data acquired with high-resolution tomographic microscopy performed at the TOMCAT beamline of the Swiss Light Source. By using phase-retrieval prior to tomographic reconstruction, the pores, fibers and matrix that compose the material can be distinguished in the data analysis. The separated information is processed to obtain geometrical information about the individual pores and fibers, which is then used to parametrize them as cylindrical objects. This allows constructing a FEM model of a cubic unit cell that is used to extract the effective thermal properties of SiCf/SiC. The analysis scheme includes steady-state and dynamic thermal transport simulations, which yield directional effective thermal conductivity and diffusivity values, respectively. Both modes of analysis show isotropic thermal conductivity values in the range of 71 W/m/K at room temperature, more than three times that of currently employed nuclear cladding materials. Combining these results with the data on the larger structural features of the material will lead to realistic results on the macroscopic thermal properties.

Thermal conductivity mapping of pyrolytic carbon and silicon carbide coatings on simulated fuel particles by time-domain thermoreflectance

Characterization of Ultralow Thermal Conductivity in Anisotropic Pyrolytic Carbon Coating for Thermal Management Applications

Measurement methods of properties of coated fuel particles for high temperature gas cooled reactor

Evaluation of Thermal Conductivity of the Constituent Layers in TRISO Particles Using Raman Spectroscopy

Improved measurement of local thermal conductivities of coatings by the steady-state Raman spectroscopy method: A case study in TRISO particles

A Model for Effective Thermal Conductivity of Porous Carbon Materials in FCM Fuel Pellets

High‐temperature thermal conductivity measurement of porous ceramic coatings with a high heat flux CO2 laser rig

Comparison Study of Silicon Carbide Coatings Produced at Different Deposition Conditions with Use of High Temperature Nanoindentation

Study of Density Measurement of Porous Pyrocarbon Layer Coated on Sphericity Kernel by Particle Size Analyzer Method

Handbook of SiC properties for fuel performance modeling

Near Infrared Radiative Properties of Thermal Barrier Coatings

Anisotropic Thermal Conductivity of 4H and 6H Silicon Carbide Measured Using Time-Domain Thermoreflectance

Effect of heat transfer channels on thermal conductivity of silicon carbide composites reinforced with pitch-based carbon fibers

A study on the thermal conductivity of proton irradiated CVD-SiC and sintered SiC, measured using a modified laser flash method with multi-step machining

FEM heat transfer modelling with tomography-based SiCf/SiC unit cell

Elevated temperature thermal and electrical properties of carbon nanotubes, graphite and graphene reinforced (Zr-Ta-W-Ti)C-SiC based high entropy carbide ceramics

Modification in the Stress Calculation of PyC Material Properties in TRISO Fuel Particles under Irradiation

Effective Thermal Conductivity of Particulate Composites with Interfacial Thermal Resistance

Microstructure and Thermal Conductivity of Fully Ceramic Microencapsulated Fuel Fabricated by Spark Plasma Sintering

Computation of effective thermal conductivity of carbon fiber felts through numerical simulation and development of reduced order models

Thermal Conductivity of Multi-Sized Porous Thermal Barrier Coatings at Micro and Nano Scales after Long-Term Service at High Temperatures