Abstract:Thin film LiCoO2 electrodes were successfully prepared with a novel facile and low-cost computer ink-jet printing technique. For preparing the stable colloid "ink", wet ball-milling was employed to stabilize the nano LiCoO2 particles and conducting agent acetylene black(AB) while two kinds of polymeric hyper dispersants CH10B and CH12B were used, respectively. Nano LiCoO2 particles were synthesized through the self-assembly method using triblock copolymer P123 as a template. The morphology, crystal structure and electrochemical performance of jet printing LCoO2 thin film electrodes were investigated in detail via SEM, XRD, cyclic voltammograms (CV) and galvanostatic charge-discharge measurements. It was determined that the average thickness of the as-printed thin-film LiCoO2 electrode was about 1.27 in. The CV curves show that the heat treatment was benefit for improving the electrochemical properties of electrode. After a slight annealing process at 450 degrees C for 30 min, the thin film electrode presented a good reversible CV behavior. In the cycling process with constant charge-discharge current 20 A/cm(2) within the potential range of 3.0-4.2 V (vs. Li+/Li), the initial discharge capacity of thin film LiCoO2 electrode was 81 mA (.) h/g, and after 50 cycles it remained 87%. After 10 cycles the charge-discharge efficiency reached near 100%.

A novel and facile route of ink-jet printing to thin film SnO2 anode for rechargeable lithium ion batteries

Enhanced lithium storage performance in three-dimensional porous SnO 2 -Fe 2 O 3 composite anode films

Thin film LiCoO2 cathode prepared by using ink-jet printing technique and its electrochemical properties

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

High-performance thin-film Li 4 Ti 5 O 12 electrodes fabricated by using ink-jet printing technique and their electrochemical properties

High-performance thin-film Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> electrodes fabricated by using ink-jet printing technique and their electrochemical properties

Facile synthesis of ultrafine SnO2 nanoparticles embedded in carbon networks as a high-performance anode for lithium-ion batteries

Electrochemical Properties of LiCoO2 Thin Film Electrode Prepared by Ink-Jet Printing Technique

Monodispersed SnO2 Nanospheres Embedded in Framework of Graphene and Porous Carbon As Anode for Lithium Ion Batteries

A facile fabrication of nanometer tetragonal rod–like SnO2 as anode for lithium ion batteries

Highly Dispersed SnO2 Nanoparticles Confined on Xylem Fiber-Derived Carbon Frameworks As Anodes for Lithium-Ion Batteries

Three-dimensional porous amorphous SnO2 thin films as anodes for Li-ion batteries

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

SnO2/Graphene Nanocomposite Coated by Carbonized Polyacrylic Acid Hydrogel As a High‐Performance Anode for Lithium‐Ion Batteries

Electrostatic Spray Deposition of Porous Sno2/Graphene Anode Films and Their Enhanced Lithium-Storage Properties

Nanocomposite SnO2–Se Thin Film As Anode Material for Lithium-Ion Batteries

A Robust and Conductive Black Tin Oxide Nanostructure Makes Efficient Lithium-Ion Batteries Possible

SnO2 nanoflower arrays on an amorphous buffer layer as binder-free electrodes for flexible lithium-ion batteries

In Situ Synthesis of SnO2nanoparticles Encapsulated in Micro/mesoporous Carbon Foam As a High-Performance Anode Material for Lithium Ion Batteries

Synthesis of SnO2/Sn@carbon Nanospheres Dispersed in the Interspaces of a Three-Dimensional SnO2/Sn@carbon Nanowires Network, and Their Application As an Anode Material for Lithium-Ion Batteries

Facile Approach to Synthesize Sno2 Nanoparticles@Carbon Nanofibers As Anode Materials for Lithium-Ion Battery