Abstract:The application of biomass char as a kind of soil amendment has an important role in soil water holding capacity (WHC), which has a close relationship with its own surface area, total pore volume, and porosity structure. In this research, the WHC and absorption properties of the chars were investigated. Two kinds of wood (poplar and pine) were pyrolyzed at both 450 and 550 degrees C to produce the chars for the experiments. The Boehm titration was used to measure the concentration of the functional groups. The surface area was determined through the Brunauer-Emmett-Teller (BET) method, while the morphological characteristic of the chars was studied by scanning electron microscopy (SEM). Furthermore, the total pore volume, average pore diameter, and porosity structure of the chars were measured by a mercury porosimeter. On the basis of the pore size distribution of the chars, the definition of the Soil Science Society of America was used as the classification standard. The results showed that there was a significant positive correlation between the WHC of the chars and the total pore volume. However, there was no obvious relationship between the surface area and the WHC of the wood chars. The water absorption rate (WAR) of chars was affected by both the total pore volume and the average pore diameter. The classification of the pore size was needed to further explain the differences of the WAR of the chars. The large pores can not only hold the water in it but also act as the passages to the small pores. The relatively small pore volume of mesopores seriously affected the WAR of the chars.

Surface Area Characteristics of Woodceramics

Water Holding Capacity and Absorption Properties of Wood Chars

An overview on engineering the surface area and porosity of biochar

Micro-structure, Surface Properties and Adsorption Capacity of Ball-Milled Cellulosic Biomass Derived Biochar Based Mineral Composites Synthesized Via Carbon-Bed Pyrolysis

Effect of processing methods and condition of raw materials on the impregnation of phenolic resinand the shape of Woodceramics after burning

Physicochemical, Pyrolytic, and Combustion Characteristics of Hydrochar Obtained by Hydrothermal Carbonization of Biomass

Polyethyleneimine modified porous wood ceramics for efficient and high-capacity adsorption of CO 2 in simulated gases

Thermal Characteristics and Kinetic Analysis of Woody Biomass Pyrolysis in the Presence of Bifunctional Alkali Metal Ceramics

Effects of Pyrolysis Temperature on Characteristics of Porosity in Biomass Chars

Effect of Steam Activation on Development of Light Weight Biomorphic Porous SiC from Pine Wood Precursor

Characteristics of Pore Structure in the Evaporated Stage of Wood-Derived Carbon

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Effects of Water-Soluble Acrylic Resin Coatings on the Pyrolysis Behavior of Wooden Bulky Waste

Research Progress and Application of Woodceramics

Preparation and Characterization of the One-Piece Wall Ceramic Board by Using Solid Wastes

Effect of Air Oxidation on Texture, Surface Properties and Dye Adsorption of Wood-Derived Porous Carbon Materials

Characterization and Activation of Pyrolytic Char from Fast Pyrolysis

Characterization Methods of Pores in Ceramics and Their Analysis

Influence of prolonged exposure of wood to water on wood structure and biochar properties

Characterization of Pyrolytic Tars Derived from Different Biomasses

Abnormal Graphitization Behavior in Near-Surface/Interface Region of Polymer-Derived Ceramics