Abstract:The formation of ash during pyrolysis of biomass pellets (corn straw and rice husk) was studied, at high temperature conditions where the formation of tars is minimized. In particular, the influences of the melting ash on the physical and chemical properties of the biomass chars were examined. Cylindrical pellets (9 by 19 mm) were pyrolyzed at three temperatures (1200, 1300, and 1400 °C) and three resident times (10, 20, and 30 min), at moderately high heating rates. The biomass behavior during pyrolysis and the properties of the formed chars were assessed by a variety of experimental techniques. Results show that the char yields decreased with increasing pyrolysis temperature and increasing residence time. The char yields from rice husk were significantly higher than those from corn straw. The ash on the surface of corn straw pellets melted and polymerized, and balls of ash formed and agglomerated, especially at the highest temperature. Molten ash of corn straw contained Ca, O, Al, Mg and Si, forming mainly CaAl2Si2O8, quartz, and cristobalite. In contrast, the surface morphology of rice husk pellets remained intact and the molten ash on the surface of chars consisted mainly of quartz and cristobalite. In the case of corn straw, the melting ash blocked the pore structure and decreased the accessible surface area. To the contrary, in the case of rice husk, the effect of ash melting on its pore structure was negligible and the accessible surface area increased upon pyrolysis. As the pyrolysis temperature increased from 1200 °C to 1400 °C, the carbon structure of the biomass chars became more orderly. Overall, increasing the pyrolysis temperature and duration increased the amount of pyrolysis gas, decreased the char yields and decreased the extent of ash melting and polymerization on the surface of the chars.

Effects of Pyrolysis Temperature on Characteristics of Porosity in Biomass Chars

Effect of Pyrolysis Conditions on the Characteristics of Biochar Produced from a Tobacco Stem

Effect of pyrolysis conditions on the char surface area and pore distribution

Effects of pyrolysis temperature on the hydrologically relevant porosity of willow biochar

Effect of Temperature on Characteristics of Bio-Oil and Bio-Char During Pyrolysis of Yunnan Pine

Effect of pyrolysis temperature on porous structure of anthracite chars produced at high temperatures

EFFECT OF PYROLYSIS CONDITIONS ON THE STRUCTURE AND GASIFICATION REACTIVITY OF CHAR

Physicochemical properties evolution of chars from palm kernel shell pyrolysis

The heating rate and final temperature impacts on the coconut shell char structure characteristics during photo-thermal pyrolysis

Characterization and Analysis of Char Produced by Biomass Fast Pyrolysis

Effects of pyrolysis temperature on pore structure and combustion characteristics of high-moisture Indonesia lignite semi-coke

Morphological Characteristics of Chars Obtained from Low-Temperature Pyrolysis of Pulverized Lignite

Thermal Evolution of Gas-Liquid-solid Products and Migration Regulation of C/H/O Elements During Biomass Pyrolysis

Study on the Effect of Pyrolysis Conditions on the Combustion Behavior and Char Structure Evolution.

Gas Emissions from Blends of Bituminous Coal and Biomass Chars under Different Pyrolysis Conditions

High-temperature pyrolysis of biomass pellets: The effect of ash melting on the structure of the char residue

Effect of Pyrolysis Temperature on Char Structure and Chemical Speciation of Alkali and Alkaline Earth Metallic Species in Biochar

Pyrolysis of the biomass in a rotary kiln II: Impacts of final pyrolysis temperature on product properties

Characteristics of Chars Prepared by Low-Temperature Co-Pyrolysis of Lignite and Biomass

Evolution of char structure during the pyrolysis of biomass pellet: Further understanding on the effects of chars two phases

Effects of Pyrolysis Atmosphere and Temperature on Coal Char Characteristics and Gasification Reactivity