Abstract:Climate change issues and acid rain episodes have triggered new research directions and the conceptualization of new preventive approaches to reduce toxic gases from entering the environment. The reduction of carbon dioxide (CO2) levels in the indoor environment are also one of the challenging human safety issues during emergency incidents and rescues; for instance, a building fire. The use of an activated carbon fiber (ACF) based mask is not only effective to filter CO2 but it is also practically easy to use during such demanding situations. Such modified adsorbents will have high adsorption volume, fast adsorption rates and good thermal, acid and alkaline resistance properties. For the emergency mode considering fires, the major task is atmospheric recovery. Thus, CO2 concentration in the post-fire smoke could be high. The smoke in the room causes suffocations and unconsciousness leading to fatal injuries. In this study, ACF was modified using copper nitrate trihydrate [Cu (NO3)2 .3H2O] by impregnation and carbonization (450°C), followed by its characterization. The modified ACF (Cu-ACF-12) showed large surface area (1147m2 g−1), high micropore volume (0.45cm3 g−1) and an average pore size of 1.57nm. CO2 removal tests were carried out in a lab scale fixed bed adsorption column using the modified ACF. The process parameters were optimized based on a Box-Behnken Design (BBD) and tested in the following ranges: gas flow rate – 150–250mlmin−1, moisture content – 0–40% and modification of the ACF impregnated with copper (Cu) – 4–12wt.%. The experimental results were statistically interpreted to elucidate the main and interaction effects. The modification of ACF showed positive effects on CO2 removal, while gas flow rate and moisture content decreased the CO2 removal. Under the optimal conditions, (gas flow rate – 150mlmin−1, moisture content – 0% and modification of the ACF – 8%), CO2 removal capacity of 2.31mmol of CO2 g−1 Cu-ACF was obtained.

Experimental study of carbon dioxide removal by activated carbon fibers

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Adsorption Characteristics of Carbon Tetrachloride from Aqueous Solution Onto Polyacrylonitrile-Based Activated Carbon Fiber

Preparation of polyacrylonitrile-based activated carbon fiber for CS2 adsorption

Versatile Activated Carbon Fibers Derived from the Cotton Fibers Used as CO2 Solid-State Adsorbents and Electrode Materials

Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

Adsorption characteristics of trace volatile organic compounds on activated carbon fibres at room temperature

Effect of Temperature on the Adsorption of Organic Vapours on Activated Carbon Fibres

Activated carbon fibers from recycled acrylic and cotton for carbon dioxide capture

Effect of process parameters influencing the chemical modification of activated carbon fiber for carbon dioxide removal

Adsorption of trace polar methy-ethyl-ketone and non-polar benzene vapors on viscose rayon-based activated carbon fibers

Research on Surface Properties of Modified Activated Carbon Fiber and Its Mercury Adsorption Performance

Adsorption Of Volatile Organic Compounds In Nitrogen Streams On Oxidized Activated Carbon Fibres

The Separation of Chloromethane Mixtures and the Recovery of Dichloromethane, Chloroform and Carbon Tetrachloride by Activated Carbon Fibre

Application and Research Progress of Activated Carbon Fiber in Chemical Separation

Preparation and Characterization of Activated Carbon Fiber (ACF) from Cotton Woven Waste

Utilization of carbon dioxide onto activated carbon fibers for surface modification

Application of amine-loaded activated carbon fiber in CO2 capture and separation

Activated carbon fibers via reductive carbonization of cellulosic biomass for adsorption of nonpolar volatile organic compounds

Preparation of high specific surface area activated carbon fiber by high-temperature vacuum activation and its superior water vapor adsorption for air humidity control

Fabrication and Evaluation of Mesoporous Poly(vinyl Alcohol)-Based Activated Carbon Fibers