Abstract:The CO2 emitted by coal-fired power plants is the main factor leading to global warming, and the capture of CO2 in the flue gas of power plants is still the main task at this stage. Many adsorbents have been developed to capture CO2 in high-temperature flue gas, but some materials are complicated to synthesize or the cost is too high. Here, we used low-cost raw materials activated carbon fiber and PEI, and used green synthesis to synthesize new adsorbents in order to capture CO2 in high-temperature flue gas of a power plant. To improve the performance of highly porous activated carbon fiber (ACF) in CO2 capture and separation, an organic polymer polyethylenimine (PEI) was loaded successfully into the oxidized ACF. The modified adsorbent was tested by FT-IR, XRD and SEM, and the CO2 adsorption capacity and CO2/N2 selectivity were analyzed. The results showed that the as-synthesized PEI-modified adsorbent has a CO2 adsorption capacity of 2.5 mmol/g, which is 1.7 times better than that of the pristine ACF adsorbent (1.5 mmol/g), at 1 bar and 333 K, and it has excellent CO2/N2 selectivity, as calculated by ideal adsorption solution theory (IAST). These data indicate that PEI was loaded successfully into the oxidized ACF. In addition, the dual site Langmuir isotherm equation and Langmuir isotherm equation can be in good agreement with the adsorption curves of CO2 and N2. In comparison with other composite adsorbents, the preparation process of the present new adsorbent is highly environmentally friendly, the synthesis method is simple and the cost is low, which demonstrates potential applications in the separation of CO2 from the flue gas of power plants.

Application and Research Progress of Activated Carbon Fiber in Chemical Separation

Advance in research on activated carbon fiber

New Progresses in Applied Research on Activated Carbon Fiber in Water Treatment

Application and Progress of Activated Carbon Fiber Electrode in Water Treatment

Progress of Study on Desulferization and Denitrification with Activated Carbon Fibers

The Separation of Chloromethane Mixtures and the Recovery of Dichloromethane, Chloroform and Carbon Tetrachloride by Activated Carbon Fibre

Activated carbon fiber: Fundamentals and applications

THE APPLICATION OF ACF IN ENVIRONMENT PROTECTION

Activate Carbon Fiber and Its Application in SOx and NOx Removal

Recent trends in activated carbon fibers production from various precursors and applications—A comparative review

Application of amine-loaded activated carbon fiber in CO2 capture and separation

Adsorption Characteristics of Carbon Tetrachloride from Aqueous Solution Onto Polyacrylonitrile-Based Activated Carbon Fiber

Progress of application of activated carbon in water treatemt:an overview

Application of Novel Activated Carbon Fiber Solid‐Phase Microextraction to Analysis of Chlorohydrocarbons in Water

PROGRESS IN THE RESEARCH ON ADSORPTION FORCE OF AROMATICS BY ACTIVATED CARBON

Activated Carbon Fiber and Its Application in Catalysis

Study on removal of low concentration of SO2 by cellulose-based activated carbon fiber

Preparation of pitch-based activated carbon fibers with high specific surface area and excellent adsorption properties

Preparation and Characterization of Activated Carbon Fiber (ACF) from Cotton Woven Waste

Study on the Removal of Low Concentration SO2 over Polyacrylonitrile-based Activated Carbon Fiber

ACTIVITY OF ACTIVATED CARBON FIBER FOR SO2 REMOVAL