Abstract:Abstract The blade tip region of the shroud-less high-pressure gas turbine is exposed to an extremely operating condition with combined high temperature and high heat transfer coefficient. It is critical to design new tip structures and apply effective cooling method to protect the blade tip. Multi-cavity squealer tip has the potential to reduce the huge thermal loads and improve the aerodynamic performance of the blade tip region. In this paper, numerical simulations were performed to predict the aerothermal performance of the multi-cavity squealer tip in a heavy-duty gas turbine cascade. Different turbulence models were validated by comparing to the experimental data. It was found that results predicted by the shear-stress transport with the γ-Reθ transition model have the best precision. Then, the film cooling performance, the flow field in the tip gap and the leakage losses were presented with several different multi-cavity squealer tip structures, under various coolant to mainstream mass flow ratios (MFR) from 0.05% to 0.15%. The results show that the ribs in the multi-cavity squealer tip could change the flow structure in the tip gap for that they would block the coolant and the leakage flow. In this study, the case with one-cavity (1C) achieves the best film cooling performance under a lower MFR. However, the cases with multi-cavity (2C, 3C, 4C) show higher film cooling effectiveness under a higher MFR of 0.15%, which are 32.6%%, 34.2%% and 41.0% higher than that of the 1C case. For the aerodynamic performance, the case with single-cavity has the largest total pressure loss coefficient in all MFR studied, whereas the case with two-cavity obtains the smallest total pressure loss coefficient, which is 7.6% lower than that of the 1C case.

Numerical Analisis of Cavity Structure at Blade Tip

Experimental and numerical investigation of high load turbine blade tip cavity structures

Optimization of Rotor Tip Cavity Shapes for Mitigating Aerodynamic Tip Leakage Losses

Influences of a Multi-Cavity Tip on the Blade Tip and the over Tip Casing Aerothermal Performance in a High Pressure Turbine Cascade

Experimental and Numerical Investigations for Dual−Cavity Tip Aerodynamic Performance in the Linear Turbine Cascade

Numerical Investigation of Thermal Performance of Unshrouded HP Turbine Blade Tips

Computational Study Of The Thermal Performance Of An Unshrouded High Pressure Turbine Blade Tip

Numerical Simulation of the Aerodynamic Characteristics of Blade Tip Leakage Flow in Steam Turbines

Treatment and Optimization of Casing and Blade Tip for Aerodynamic Control of Tip Leakage Flow in a Turbine Cascade

Investigation on Film Cooling and Aerodynamic Performance of the Multi-Cavity Tip with Inclined Film Holes in a Linear Turbine Cascade

Unsteady Winglet-Cavity Tip on Leakage Flow in a High-Pressure Turbine Stage of Low-Aspect Ratio

Film Cooling and Aerodynamic Performance on Multi-Cavity Squealer Tip of a Turbine Blade

Effects of Tip Cavity Geometries on the Aerothermal Performance of the Transonic Turbine Blade with Cavity Tip

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Aerodynamic Optimization of Winglet-Cavity Tip in an Axial High Pressure Turbine Stage

Tip Leakage Flow And Heat Transfer Predictions For Turbine Blades

Aerothermal performance of cavity tip with flow structure effects in a transonic high-pressure turbine blade

Numerical Investigation of the Blade Tip and Overtip Casing Aerothermal Performance in a High Pressure Turbine Stage

Aerothermal Optimization and Sensitivity Analysis of a Turbine Rotor Tip with a Circumferential Casing Groove Configuration

Numerical Investigations on the Blade Tip Clearance Excitation Forces in an Unshrouded Turbine

Experimental and numerical investigations for turbine aerodynamic performance with different pressure side squealers and incidence angles