Abstract:In this study, to overcome the inherent hydrophobicity and improve the comprehensive performance of polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes, hydrophilic TiO2 particles were utilized to modify PVDF UF membranes. To obtain the strong binding force and homogenous TiO2 distribution on PVDF UF membranes, polydopamine (pDA) as the “bio-glue” was architecturally built between TiO2 and PVDF membranes, and the modification process was facilely designed via self-polymerization of dopamine and subsequent hydrolysis of ammonium fluotitanate. Water contact angle tests proved the significant improvement in the hydrophilicity of PVDF membranes after modification. The morphologies of various membranes before and after modification were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM) and the chemical reactions during different modification stages were evaluated by X-ray photoelectron spectroscopy (XPS) tests. It was found that the pDA layer via self-polymerization of dopamine on PVDF membranes could assist TiO2 to tightly and homogeneously bind onto PVDF surface for improving the stability and anti-fouling property of membranes because of the coordination bond (CO···Ti) formed between TiO2 and pDA, and the pore sizes of PVDF membranes obviously decreased after modifications. The possible mechanisms during modifications were discussed. The comprehensive properties of PVDF membranes after such facile modifications had been greatly enhanced according to the results of water flux, bovine serum albumin (BSA) rejection, anti-fouling performance, and TiO2 binding performance characterizations. Both the water flux and BSA rejection could be simultaneously improved at the optimized hydrolysis time. Furthermore, the static and dynamic BSA adsorption tests were carried out. Interestingly, the amounts of BSA adsorption onto modified membranes demonstrated the opposite trends for the static and dynamic BSA adsorption tests. The possible reason was clarified based on the competition between the improved hydrophilicity and the adsorption ability of TiO2. Therefore, TiO2 modified PVDF UF membranes developed by this novel strategy have attractive potential for water environmental remediation.

Hydrophilic Modification of Poly(ether Sulfone) Ultrafiltration Membrane Surface by Self-Assembly of TiO2 Nanoparticles

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Self-Assembly of Tio2 Nanoparticles Around the Pores of Pes Ultrafiltration Membrane for Mitigating Organic Fouling

Alleviating Membrane Fouling of Modified Polysulfone Membrane Via Coagulation Pretreatment/ultrafiltration Hybrid Process

Fabrication of SPES/Nano-TiO2 Composite Ultrafiltration Membrane and Its Anti-fouling Mechanism

Fabrication of TiO2-modified Polytetrafluoroethylene Ultrafiltration Membranes Via Plasma-Enhanced Surface Graft Pretreatment

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Antifouling modification of PVDF membranes via in situ mixed-charge copolymerization and TiO2 mineralization

Fabrication and characterization of a novel TiO2 nanoparticle self-assembly membrane with improved fouling resistance

A synergetic analysis method for antifouling behavior investigation on PES ultrafiltration membrane with self-assembled TiO2 nanoparticles

Sulfonated Poly(α,β,β-Trifluorostyrene)-doped PVDF Ultrafiltration Membrane with Enhanced Hydrophilicity and Antifouling Property

Super-Hydrophilic and Fouling Resistant Pvdf Ultrafiltration Membranes Based on A Facile Prefabricated Surface

A facile strategy to enhance PVDF ultrafiltration membrane performance via self-polymerized polydopamine followed by hydrolysis of ammonium fluotitanate

Assembly of Self-Cleaning Perfluoroalkyl Coating on Separation Membrane Surface

Highly hydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes via postfabrication grafting of surface-tailored silica nanoparticles.

Preparation and anti-biofouling performance of PSf/TiO2 ultrafiltration membrane by in-situ embedment approach

Reduced fouling ultrafiltration membranes via in-situ polymerisation using polydopamine functionalised titanium oxide

Surface Engineering and Self-Cleaning Properties of the Novel TiO2/PAA/PTFE Ultrafiltration Membranes

Preparation of TiO2/PVDF ultrafiltration membrane

Surface Hydrophilic Modification of PVDF Membranes by Trace Amounts of Tannin and Polyethyleneimine