Abstract:Fibre-reinforced high-performance fly ash foam concrete (FHFC) has broad engineering application prospects owing to its lightweight and high-strength, energy-saving, heat preservation and environmental protection characteristics. Its mechanical properties and constitutive models can serve as an important basis for engineering structural design, numerical analysis and structural reliability monitoring. Aimed at exploring the influence of different factors on the physical and mechanical properties of FHFC and its stress–strain constitutive relationship, the dry density, cube compressive strength, splitting tensile strength and axial compressive strength of 27 groups of FHFC with different mixture proportions were measured and analysed. The primary and secondary relationships of the water–binder ratio, sand–binder ratio and replacement rate of fly ash to cement on the physical and mechanical properties of FHFC were studied. The failure mechanism of FHFC under uniaxial compression was discussed and a two-stage phenomenological constitutive model of FHFC was established through theoretical derivation. The results show that sand–binder ratio and water–binder ratio are the main factors affecting the physical and mechanical properties of FHFC. The stress–strain curve shows the characteristics of stages, namely, the elastic–plastic stage, the stress upswing stage, the plastic plateau stage and the failure stage. The influence of each factor on the elastic–plastic stage of the stress–strain curve shows obvious regularity, but the influence on the plastic stage is complex, and the regularity is not significant. The established two-stage phenomenological constitutive model is in good agreement with the stress–strain curve obtained from the test, and it can more accurately predict the uniaxial compression response of FHFC. The model can be used for the theoretical calculation of the bearing capacity of high-strength foam concrete structural members and even serve as an important basis for the engineering application of high-strength foam concrete. The influences of various factors on the performance of fibre-reinforced high-performance fly ash foam concrete were investigated. The uniaxial compression failure mechanism and stress–strain curve of fibre-reinforced high-performance fly ash foam concrete in different test groups were analysed. A two-stage phenomenological constitutive model suitable for fibre-reinforced high-performance fly ash foam concrete was established.

Study on the influence of the fiber and fly ash on the property of the foam concrete

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Study on the Performance of Foam Concrete Prepared from Decarburized Fly Ash

Experimental Study of Strength Characteristics of Foam Concrete

Experimental Research on Properties of High-Strength Foamed Concrete

Experimental Research on Properties of Foamed Concrete Reinforced with Polypropylene Fibers

Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete

Mechanical properties and constitutive model of fibre-reinforced high-performance class-F fly ash foam concrete

Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation

Improved Fly Ash Based Structural Foam Concrete with Polypropylene Fiber

Study of Geopolymer Foamed Composite Based on Cement and Fly Ash

The Effect of Fly Ash and Red Mud Content on the Compressive Strength of Foam Concrete

Workability and Mechanical Properties of Polypropylene Fiber Reinforced Concrete

An Orthogonal Experimental Study on the Influence of Steam-Curing on Mechanical Properties of Foam Concrete with Fly Ash

Effect of Fly Ash with Different Particle Size Distributions on the Properties and Microstructure of Concrete

Interfacial enhancement technology in high-volume fly ash foam concrete: microscopic mechanism and heavy metal safety assessment

Drying shrinkage, durability and microstructure of foamed concrete containing high volume lime mud-fly ash

Influence of Fibers and Bubble Structure on Thermal Conductivity and Mechanical Performances of Foam Concrete

Research on Improving Cementitious Material Properties by Adding FineFly Ash

Mechanical Properties and Axial Compression Deformation Property of Steel Fiber Reinforced Self-Compacting Concrete Containing High Level Fly Ash