Abstract:Abstract High-temperature superconducting double-pancake (DP) coils wound by the no-insulation (NI) approach have been proved to have a high thermal stability and a self-protecting ability. This paper mainly studies the effect of a quench of one pancake coil on the electromagnetic-thermal-mechanical behaviors of an NI DP coil in the self field and the high field. An electromagnetic-thermal coupling quench model is used to calculate the distributions of current, temperature and electromagnetic field in the coil, and then a three-dimensional homogeneous mechanical model is built to analyze the changes in strain and stress during a quench by considering the distributions of thermal strain and Lorentz force of the coil. The results indicate that the obvious increase in circumferential current and radial current density in the bottom pancake coil is induced by a quench of the top pancake coil due to the electromagnetic coupling effect in the self field and the high field, and that the DP coil still has a negative coil voltage during a quench in different fields. Although the bottom pancake coil has a large circumferential current, the mechanical deformation of the DP coil during a quench is mainly caused by the temperature rise in the self field. The thermal expansion of the top pancake coil has a remarkable effect on the mechanical behaviors of the bottom pancake coil. Moreover, the DP coil has the same temperature rise and mechanisms of bypass current in the self field and the high field. However, the mechanical deformation of the DP coil is based on the combined effects of temperature rise and Lorentz force in the high field. It can be found that the values of the hoop and axial stresses are affected by a large electromagnetic stress.

ELECTROMAGNETIC CHARACTERISTICS OF MCP BSCCO-2212 CURRENT LEAD DURING QUENCHING PROCESS UNDER SELF FIELD

Electromagnetic-Thermal Characteristics of Mcp Bscco-2212 Tube During Quenching Process in Self-Field

2-D Model for Calculating Current Density Distribution and Flux-Flow Resistivity of MCP BSCCO-2212 Rod During Quenching Process in Self Field

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Quench characteristics in the multi-sectioned superconducting magnet impregnated with epoxy resin

Electromagnetic and Thermal Analysis of an Intra-layer No-Insulation Coil During Quench

Thermal-hydraulic Analysis on Quench Behavior of Indium-Tin Soldered REBCO Composite Conductor

Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil

A Numerical Adiabatic Model for the Quench Behavior Analysis of the Ag-Matrix Bi-2212 Round Wire

Study of Electromagnetic Interference on Quench Detecting System of HTS Current Leads for EAST

Influence of Current Diffusion in Superconducting Magnet Fabricated by High Stabilizer Aluminum on Quench Propagation

Electromagnetic-thermal-mechanical behaviors of a no-insulation double-pancake coil induced by a quench in the self field and the high field

Electric Current Distribution During Electromagnetic Braking in Continuous Casting

A General Model for Simulating the Quench Behavior of Canted-Cosine-theta (CCT) Quadrupole Magnets

Study of AC Loss and Temperature Distribution of a BSCCO Coil Cooled in Liquid Nitrogen or Using a Cryocooler

An Analysis of AC Loss of Bi-2212 CICC

THE CURRENT LEADS AND THEIR ELECTRICAL INSULATION & THERMAL CONDUCTION FOR 35kJ SMES

Numerical determination of the threshold magnetic field in superconducting strips and coils triggering dynamic resistance

Numerical Simulation of Electromagnetic Phenomena and Solidification under a Pulsed Magnetic Field

Numerical and Experimental Study for the Quench Propagation of A Test Superconducting Magnet

Quench Behavior Comparison Between Solid Nitrogen and Conduction Cooled REBCO Coated Conductor