Abstract:Chemically induced shape transformations of isotropic seeds, comprised of iron oxyhydroxides and iron oxide borate into nanorods, is reported. Transient growth studies show that the nanorods are formed via phase transformation and aggregation of various metastable species. Addition of tetra-methyl-ammonium hydroxide (TMAH) to the in situ synthesized seeds ensures a typical reaction pathway that favors formation of magnetite (Fe 3O4) via the steps of chemical etching, phase transformation of intermediates, and crystal consolidation. Whereas, with addition of sodium hydroxide (NaOH), either magnetite (Fe 3O4) or a mixture of (γ-Fe 2O3 + α-FeOOH) is obtained. The shape with both the additives is always that of nanorods. When the seeds treated with TMAH were aged in an ultrasonication bath, rods with almost twice the length and diameter (length = 2800 nm, diameter = 345 nm) are obtained as compared to the sample aged without ultrasonication (length = 1535 nm, diameter = 172 nm). The morphology of nanostructures depending upon other experimental conditions such as, aging the sample at 60 ∘C, seeds synthesized under ultrasonication/ stirring or externally added are also examined and discussed in detail. All the samples show high coercivity and strong ferromagnetic behavior at room temperature and should be promising candidates as ferro-fluids for various applications.

Characterization of Fe Nanorods Grown Directly from Submicron-Sized Iron Grains by Thermal Evaporation

Thermal Growth and Nanomagnetism of the Quasi-one Dimensional Iron Oxide

Growth and process conditions of aligned and patternable films of iron(III) oxide nanowires by thermal oxidation of iron.

Selective Synthesis of Fe 2 O 3 and Fe 3 O 4 Nanowires Via a Single Precursor: A General Method for Metal Oxide Nanowires

Synthesis of Fe-doped CeO2 Nanorods by a Widely Applicable Coprecipitation Route

Synthesis and Characterization of Single-Crystalline Mnfe(2)O(4) Nanorods Via A Surfactant-Free Hydrothermal Route

Synthesis of Fe-group Metal Oxide Nanostructures by Thermal Oxidation and Their Magnetic Properties.

Room Temperature Synthesis of Rod-Like FeC{sub 2}o{sub 4}{center_dot}2h{sub 2}O and Its Transition to Maghemite, Magnetite and Hematite Nanorods Through Controlled Thermal Decomposition

Growth mechanism and magnetic properties of highly crystalline NiO nanocubes and nanorods fabricated by evaporation

The Oriented Self‐Assembly of Magnetic Fe3O4 Nanoparticles into Monodisperse Microspheres and Their Use As Substrates in the Formation of Fe3O4 Nanorods

Modulated Structure Assisted Growth and Properties of Fe3o4 Nanoneedle Films Using A Thermal Oxidation Process in the Air

Controlled Synthesis of Α-Fe2o3 Nanorods and Its Size-Dependent Optical Absorption, Electrochemical, and Magnetic Properties

Controlled Growth of Large-Area, Uniform, Vertically Aligned Arrays of α-Fe<sub>2</sub>O<sub>3</sub>Nanobelts and Nanowires

Synthesis of iron oxide nanorods via chemical scavenging and phase transformations of intermediates at ambient conditions

Growth of Carbon Nanotubes on Si Substrate Using Fe Catalyst Produced by Pulsed Laser Deposition.

Synthesis and self-organization of γ-Fe2O3 nanoparticles by hydrothermal chemical vapor deposition

Synthesis of Fe2O3 nanowires by oxidation of iron

Synthesis and Characterization of Α-Feo(oh) Nano-Rods in Situ Via a Solution-Oxidation

Applied Stress-Assisted Growth of Single Crystal Γ-Fe2o3 Nanowires

An Effective Approach to Fabricate Self-Supported Fe3O4 Nanocrystals Derived from Iron Substrate

Synthesis and Magnetic Properties of Single-Crystalline Magnetite Nanowires