Abstract:Deep understanding of the Si-B binary system is mainly essential for producing solar-grade silicon from metallurgical-grade silicon (MG-Si) as raw material. The phase diagram and thermodynamic properties are the main pillars of this understanding, where the phase diagram is useful for determining the Si terminal solubility, which is necessary for the success of the solvent refining process, by careful examination of the solvus line. Since Si-B phase diagrams found in literature are old and based on old experimental data, Thermo-Calc software 2019b is used in this work to reassess the temperature–composition phase diagram of the Si-B binary system at pressure of 1 bar. The resulting phase diagram is compared with experimental and computed diagrams found in literature and used to deduce the different reactions, melting temperatures, and solubilities of Si in B and B in Si, and all the identified discrepancies are discussed. There are six single phases other than elemental boron and elemental silicon: liquid, diamond-Si solid solution, β-B solid solution, SiB3 solid solution, SiB6 considered as a stoichiometric compound, and SiBn solid solution. In addition, the phase diagram includes nine regions of two mixed phases, all of which are thoroughly discussed. The melting points of pure β-B and pure diamond-Si are determined. Two peritectic reactions are found, a eutectic reaction, and a peritectoid reaction. The maximum solubility of Si in B is found to be 5.37 Si mass percent at 2310.04 ± 0.025 K, while that of B in Si is found to be 0.41 B mass percent at 1657.56 ± 0.025 K.

Thermodynamic assessment of the B–C–Si system

Thermo-Calc Determination of Phase Diagram of Si-B Binary System

Thermodynamic assessment of the Mo‐Si system

Thermodynamic Reassessment of the C-Ni-Si System Using a Four Sublattice Model for Ordered/Disordered fcc Phases

An assessment of the Fe-C-Si system

Thermodynamic Assessments of the Al2O3-Al4C3-AlN and Al4C3-AlN-SiC Systems

Phase transition character and thermodynamic modeling of the P6 and P6' hexagonal Si-N system supplemented by first-principles calculations

THERMODYNAMIC ASSESSMENT OF THE Fe-Nb-Si SYSTEM

Critical Evaluation and Thermodynamic Re-Optimization of the Si–P and Si–Fe–P Systems

Thermodynamic Modeling of the Bi-Se and Bi-Te Binary Systems

T2 phase site occupancies in the Cr--Si--B system: a combined synchroton-XRD/first-principles study

A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments

Phase Equilibria of the Sn-Sb Binary System

Chemical Reactions in the Co–Si–C System

CALPHAD-Type Reassessment of Cu-Si and Full Assessment of the Al-Cu-Si Systems

Thermodynamic Modeling of the B-Ti-Zr System over the Whole Composition and Temperature Ranges

Thermodynamic Assessment of the Ti–Al–Zr System and Atomic Mobility of Its Bcc Phase

Experimental Investigation of Phase Equilibria in the Co-Ta-Si Ternary System

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Thermodynamic Assessment of the Gd–Sb System

Thermodynamic Assessments of Ti-Al, Ti-Fe, and Ti-Al-Fe Systems with Four-Sublattice Description of Ordered Body-Centered Cubic Phase and Density Functional Theory Data