Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Study on the Solvothermal Preparation of Polyethylene/organophilic Montmorillonite Nanocomposites

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay Content

Preparation and Thermal Characteristics of Silane-Grafted Polyethylene/montmorillonite Nanocomposites

Study on Preparation and Properties of Silane-crosslinked Polyethylene/ Magnesium Hydroxide/ Montmorillonite Nanocomposites

Properties of Poly (vinyl Acetate) /organophilic Montmorillonite Nanocomposites Prepared by in Situ Emulsion Polymerization

NOVEL ORGANIC MODIFICATION OF MONTMORILLONITE BY SOLID-STATE REACTION WITH EPOXY COMPOUND

Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites

Synthesis and Mechanical Properties of PE/O-Mmt Composites

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Preparation and Characterization of Epoxy/Montmorillonite Nanocomposites

Study on Emulsion Polymerization of PMMA/OMMT Nano‐Composites by Redox Initiation

Rheological Behavior of Polypropylene/Organic Montmorillonite Nanocomposite

Preparation and Properties of Polyethylene/Montmorillonite Composites

Structure Characteristics and Thermal Properties of Silane-Grafted-Polyethylene/Clay Nanocomposite Prepared by Reactive Extrusion

Poly(etherimide)/montmorillonite nanocomposites prepared by melt intercalation: morphology, solvent resistance properties and thermal properties