Abstract:Aluminum Nitride (AlN) based surface acoustic wave (SAW) pressure sensors for harsh environment applications are of great interest in recent years. Such sensor employs a thick diaphragm (similar to 50 mu m) to endure the high pressure, but this seriously limits the sensitivity of these devices. Understanding of the working mechanism and the effect of geometrical parameters will yield the design principles to achieve improved sensitivity. In this letter, the effect of diaphragm on the performance of SAW pressure sensors is studied. AlN based SAW resonators on (100) wafer with different diaphragm shapes are fabricated, packaged, and characterized. Pressure coefficient of frequency (PCF) of pressure sensors with circular diaphragm, rectangular diaphragm (small aspect ratio) and rectangular diaphragm (large aspect ratio) is found to be 0.071 ppm/psi, 0.038 ppm/psi, and -0.171 ppm/psi, respectively. The longitudinal and lateral strains along the SAW propagation direction (< 100 > direction) have the opposite effects on the frequency change, i.e., longitudinal strain increases the resonant frequency while lateral strain decreases the resonant frequency. Hence, the measured PCF is a combined effect of the two strains, whereby increase in lateral strain results in lower PCF. The ratio of longitudinal/lateral strain is determined by the diaphragm shape. The rectangular diaphragm (large aspect ratio) with only lateral strain thus shows negative PCF. Additionally, by changing the wafer plane, SAW propagation direction and ratio of longitudinal/lateral strains may help to enhance the primary strain effect and minimize the reverse strain effect. This approach could further improve the sensitivity of pressure sensor without sacrificing its high pressure sensing range for harsh environment applications. (C) 2015 AIP Publishing LLC.

Research on corrugated diaphragms based on packing structure of pressure sensor

Design and Simulation of Corrugated Diaphragm Applied to the MEMS Fiber Optic Pressure Sensor

Study on the factors affecting the performance of oil-filled pressure sensitive core

Comparative study of a high pressure sensor with rectangular diaphragm

Application And Optimization Of Stiffness Abruption Structures For Pressure Sensors With High Sensitivity And Anti-Overload Ability

Influence of Corrugation Size and Location on Sensitivity Enhancement for MEMS-Based Pressure Sensor

Research on corrugated diaphragm sensing technique detecting the pressure outside the casing

Modeling and Analysis of a Novel Combined Peninsula–island Structure Diaphragm for Ultra-Low Pressure Sensing with High Sensitivity

Optimal design of high-sensitivity pressure sensor with peninsula-structured diaphragm

Structural Analysis of Micromachined Piezoresistive Pressure Sensors for Dynamic Pressure Measurements

Design of Diaphragm Structure for Piezoresistive Pressure Sensor Using Topology Optimization

Structured Diaphragm with a Centre Boss and Four Peninsulas for High Sensitivity and High Linearity Pressure Sensors

Modeling and analysis of the effect of strain gradient to design diaphragm for pressure sensing application through finite element analysis

Optical Fiber Pressure Sensor Based on Corrugated Diaphragm Structure

Design of Circular Arc Corrugated Diaphragm

A pressure-deformation analytical model for rectangular diaphragm of MEMS pressure sensors

Optical Fiber Fabry-Perot Acoustic Sensors Based on Corrugated PET Diaphragms

A High Sensitive Pressure Sensor with the Novel Bossed Diaphragm Combined with Peninsula-Island Structure

Design of High-pressure Packing Seal for Pressure Sensor Calibration Device

Diaphragm Shape Effect On The Sensitivity Of Surface Acoustic Wave Based Pressure Sensor For Harsh Environment

A New Silicon Diaphragm Pressure Sensor and Its Stress Analysis