Abstract:In this manuscript, optical fiber Fabry-Perot acoustics sensors based on corrugated PET diaphragms were proposed, fabricated and tested. Corrugations of different depths were introduced into the PET by simple hot-embossing process. The performances of the fabricated acoustics sensors were tested and analyzed. The results showed the corrugations could effectively improve the performances of the sensors. The proposed fabrication method of the corrugated diaphragm showed the advantages of simplicity and low-cost, and the acoustic sensors showed flexible control of corrugated structure, which were suitable for weak acoustic sensing.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the performance of fiber - optic Fabry - Perot (F - P) acoustic sensors, especially by introducing polyethylene terephthalate (PET) films with corrugations of different depths to achieve this goal. Specifically, the paper explores how to fabricate these corrugated PET films through a simple hot - embossing process and analyzes the impact of these corrugations on the performance of acoustic sensors. Research shows that corrugations can effectively improve the performance of sensors, especially in weak - sound detection. In addition, the paper also discusses the relationship between corrugation depth and mechanical sensitivity and finds that there are differences between experimental results and theoretical predictions. This difference may be due to the change in the thickness of the PET film during the hot - embossing process. ### Main research contents: 1. **Proposed a new type of sensor**: A fiber - optic Fabry - Perot acoustic sensor based on corrugated PET films. 2. **Manufacturing method**: A low - temperature hot - embossing technique was used to fabricate corrugated PET films. This method has the advantages of low cost, high throughput and high resolution. 3. **Performance testing**: The performance of sensors with different corrugation depths was experimentally tested, including frequency response, minimum detectable sound pressure (MDP) and dynamic range. 4. **Comparison between theory and experiment**: The phenomenon of inconsistency between experimental results and theoretical predictions was found, and through finite - element simulation, it was verified that the reason for this inconsistency may be the change in the thickness of the PET film during the hot - embossing process. ### Key conclusions: - Corrugated PET films can significantly improve the performance of acoustic sensors, especially in weak - sound detection. - Experimental results show that as the corrugation depth increases, the mechanical sensitivity of the sensor first increases and then decreases, which is inconsistent with the monotonically decreasing trend predicted by theory. - Through finite - element simulation, it was verified that the reason for the inconsistency between experimental results and theoretical predictions is the change in the thickness of the PET film during the hot - embossing process. In conclusion, this paper successfully improves the performance of fiber - optic Fabry - Perot acoustic sensors by introducing corrugated PET films and provides new ideas and methods for future research.

Optical Fiber Fabry-Perot Acoustic Sensors Based on Corrugated PET Diaphragms

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

A fiber-optic Fabry-Perot acoustic sensor based on PDMS diaphragm

Small In-Fiber Fabry-Perot Low-Frequency Acoustic Pressure Sensor with PDMS Diaphragm Embedded in Hollow-Core Fiber

Design and Simulation of Corrugated Diaphragm Applied to the MEMS Fiber Optic Pressure Sensor

High Sensitivity and High Stability Dual Fabry-Perot Interferometric Fiber-Optic Acoustic Sensor Based on Sandwich-Structure Composite Diaphragm

Diaphragm Based Long Cavity Fabry–Perot Fiber Acoustic Sensor Using Phase Generated Carrier

High-sensitivity fiber-optic low-frequency acoustic detector based on cross-correlation demodulation

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

Diaphragm-type Fiber-Optic Interferometric Acoustic Sensor

A Grating Interferometric Acoustic Sensor Based on a Flexible Polymer Diaphragm

Analysis and Optimization of Acoustic Sensor Based on Fiber Fabry-Pérot Etalon

Carbon Nanocoils and Polyvinyl Alcohol Composite Films for Fiber-Optic Fabry–Perot Acoustic Sensors

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Ultra-thin DLC diaphragm-based optical fiber sensor achieving a highly sensitive and broadband acoustic response

Mechanical Filter-Based Differential Pressure Fiber-Optic Fabry-Perot Infrasound Sensor

A New Optical Fiber Acoustic Sensor Based on Air Backing Mandrel Type Fiber Optic Hydrophone

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor

PDMS diaphragm based miniature fiber-optic Fabry–Perot dynamic pressure sensor for turbomachinery application

Fabry–Perot acoustic sensor based on a thin gold diaphragm

An Optical Acoustic Detection System Based on Fabry Pérot Etalon Stability Structure