Abstract:Yttrium-stabilized zirconia(3YSZ) microspheres with different size ranges were prepared by sol-gel method, followed by electroless Ni plating on their surfaces. The as-prepared core-shell structure 3YSZ/Ni microspheres were then spark plasma sintered (SPS) into 3YSZ/Ni composites, in which a uniform distribution of ceramic and metal phases was achieved. The underlying correlations among microsphere size, Ni concentration, microstructure, and resultant mechanical properties were experimentally analyzed. Results show that: continuous and smaller microsphere sizes can obtain relatively high-density samples with good mechanical properties, which can be proved by the Minimum Solid Area (MSA) model. 3YSZ sample prepared with the optimized microsphere size range of 0–50 μm exhibits the highest relative density and fracture toughness of 98.8% and 5.51 ± 0.33 MPa·m 1/2 , respectively. Furthermore, the core-shell structure 3YSZ/Ni microspheres with varying Ni contents exhibited a uniform composite of flakes and particles Ni metal after sintering, among which 3YSZ/10 wt%Ni composites have achieved better mechanical properties, with density, hardness and fracture toughness of 96.9%, 8.61 ± 0.35 GPa, 7.92 ± 0.71 MPa·m 1/2 , respectively. Firstly, the uniformly dispersed Ni metal flakes or particles provide multiple toughening effects, including crack bridging, pull-out, interfacial debonding, crack deflection, etc. Secondly, due to residual stress, cracks tend to deflect near Ni metal, extending the crack path. Thirdly, the 3YSZ matrix's transition from an intergranular to a transgranular fracture also increases fracture energy consumption. Compared to the pure 3YSZ sample with a wide microsphere size range of 0–100 μm, the fracture toughness of 3YSZ/10 wt%Ni composites with a microsphere size of 0–50 μm is increased by 73.9%.

MoSi2–ZrO2 composites—fabrication, microstructures and properties

Hot-pressed ZrB2–SiC–YSZ Composites with Various Yttria Content: Microstructure and Mechanical Properties

Microstructure and mechanical properties of zirconia-toughened ZrB2–MoSi2 composites prepared by hot-pressing

Mechanical properties and toughening mechanisms of SiCw/ZrO2 (6% mol Y2O3) ceramic composites

Microstructures and mechanical properties of reactive spark plasma-sintered ZrB2–SiC–MoSi2 composites

Microstructure and mechanical properties of hot pressed ZrB2–SiCp–ZrO2 composites

Microstructure and Mechanical Properties of Hot-Pressed Al2O3–mullite–ZrO2–SiC Composites

Microstructure and Mechanical Properties of SiC/zirconia-toughened Mullite Nanocomposites Prepared from Mixtures of Mullite Gel, 2Y-TZP, and SiC Nanopowders

Mechanical Properties and Microstructure of Sic-Zro2(3y)-Al2o3 Nanocomposites

Multi-phase Aluminide-Based Composites – Fabrication, Microstructure and Properties

Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Microstructure, Mechanical, and Thermal Properties of in Situ-Synthesized (zrb2+sic)/zr2[al(si)]4c5 Composites

Study on Mechanical Properties of Hot Pressing Sintered Mullite-Zro2 Composites with Finite Element Method

Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites

Microstructure evolution and mechanical properties of 3YSZ/Ni composites with uniform phase distribution prepared by core-shell structure microspheres

Microstructure and Properties of Hot Pressed Zr2(Al(Si))4C5/SiC Composites

Preparation And Mechanical Properties Of Zrb2-Based Laminated Composites

Microstructure and mechanical properties of in situ SiC particulates reinforced MoSi2 matrix composite

Mechanical properties of silicon carbide—in situ zirconium carbonitride composites