Abstract:Tensile rheological behavior of the Zr35Ti30Be27·5Cu7.5 metallic glass under conditions of high strain rates (strain rates ranging from 0.05 s−1 to 0.5 s−1) within the supercooled liquid region was studied. The stress-strain curve reveals that this metallic glass demonstrates non-Newtonian flow characteristics under these circumstances. The peak stress associated with stress overshoot increases as temperature decreases and strain rate increases. However, the steady-state flow stress displays an anomalous decrease due to rapid necking at high strain rates. Subsequently, the thermal processing map of the Zr35Ti30Be27·5Cu7.5 metallic glass was established and analyzed. It reveals that the alloy has relatively excellent thermoplastic forming ability at temperature between 630 K and 655 K and strain rates between 0.05 s−1-0.2 s−1. We found that under strain rates ε ˙ ≥ 10 − 2 s − 1 , the strain rate is the primary factor influencing normalized viscosity. Therefore, we developed a simplified Maxwell-Pulse constitutive model applicable to metallic glass in the supercooled liquid region under high strain rate conditions, by simplifying the constitutive equation for steady-state flow stress using a simplified formula for normalized viscosity calculation. The predictions of this simplified modified model align well with experimental values. By comparing the simplified and unsimplified Maxwell-Pulse constitutive models, the overall fitting accuracy of the simplified model was improved by 3–5%, with the highest improvement of 67% in the steady-state flow stress stage. These results indicate that the modified model accurately reflects the stress-strain relationship for the Zr35Ti30Be27·5Cu7.5 metallic glass under high temperature and high strain rate tensile conditions.

Superplastic Forming of Zr Based Metallic Glass Ribbons under Equibiaxial Tension

Mechanical Response of Zr51.9Cu23.3Ni10.5Al14.3 Metallic Glass Ribbon under Varying Strain Rates

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Diffusion Bonding of a Zr-based Metallic Glass in Its Supercooled Liquid Region

Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region

Superplastic Formability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region

On the Serrated Behavior during Plastic Deformation of a Zr-Based Bulk Metallic Glass

Deformation Behavior of Zr-Based Metallic Glass and Microforming of Microgears

Thermoplastic gas pressure forming of bulk metallic glass sheets under biaxial tension

SUPERPLASTIC FLOW BEHAVIOR OF Zr BASE BULK METALLIC GLASS IN SUPERCOOLED LIQUID REGION

Stress-induced Structural Change During Superplastic Deformation of Bulk Zr-based Metallic Glass

Microforming Behavior of Zr-based Bulk Metallic Glass

Deformation and Crystallization of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 Bulk Metallic Glass in the Supercooled Liquid Region

Densification and Strain Hardening of a Metallic Glass under Tension at Room Temperature.

Tensile Deformation Behaviour of Zr-based Glassy Alloys

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Influence of Size-Dependent Free Volume Variation and Distribution on the Thermoplastic Flow Behavior of Zr-based Bulk Metallic Glass

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

Densification and heterogeneity enhancement of Fe-based metallic glass under local plastic flow