Abstract:Metallic glasses are frequently used as structural materials. Therefore, it is important to develop methods to predict their mechanical response as a function of the microstructure prior to loading. We develop a coarse-grained spring network model, which describes the mechanical response of metallic glasses using an equivalent series network of springs, which can break and re-form to mimic atomic rearrangements during deformation. To validate the model, we perform simulations of quasistatic, uniaxial tension of Lennard-Jones and embedded atom method (EAM) potentials for Cu$_{50}$Zr$_{50}$ metallic glasses. We consider samples prepared using a wide range of cooling rates and with different amounts of crystalline order. We show that both the Lennard-Jones and EAM models possess qualitatively similar stress $\sigma$ versus strain $\gamma$ curves. By specifying five parameters in the spring network model (ultimate strength, strain at ultimate strength, slopes of $\sigma(\gamma)$ at $\gamma=0$ and at large strain, and strain at fracture where $\sigma=0$), we can accurately describe the form of the stress-strain curves during uniaxial tension for the computational studies of Cu$_{50}$Zr$_{50}$, as well as recent experimental studies of several Zr-based metallic glasses. For the computational studies of Cu$_{50}$Zr$_{50}$, we find that the yield strain distribution is shifted to larger strains for slowly cooled glasses compared to rapidly cooled glasses. In addition, the average number of new springs and their rate of formation decreases with decreasing cooling rate. These effects offset each other at large strains, causing the stress-strain curve to become independent of the sample preparation protocol in this regime. In future studies, we will extract the parameters that define the spring network model directly from atomic rearrangements that occur during uniaxial deformation.

Mechanical Response of Zr51.9Cu23.3Ni10.5Al14.3 Metallic Glass Ribbon under Varying Strain Rates

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

The rheological behavior and constitutive model of Zr35Ti30Be27·5Cu7.5 metallic glass under high strain rate tensile conditions within the supercooled liquid region

Ductile Fracture of Bulk Metallic Glass Zr 50 Cu 40 Al 10 under High Strain-Rate Loading

Effect of Strain Rate on Mechanical Deformation Behavior in CuZr Metallic Glass

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

Mechanical Behavior of A Zr-Based Metallic Glass at Elevated Temperature under High Strain Rate

Tensile Elastic Behavior of A Zr-Cu-Ag-Al Bulk Metallic Glass

Effect of Pre-Existing Shear Bands on the Tensile Mechanical Properties of A Bulk Metallic Glass

Characterizing the mechanical response of metallic glasses to uniaxial tension using a spring network model

Initiation and Evolution of Shear Bands in Bulk Metallic Glass under Tension—an in Situ Scanning Electron Microscopy Observation

Hierarchical micro-nanostructured Zr-based metallic glass with tensile plasticity

Microstructure and correlated mechanical properties study of Ni-(Fe, Co)-Mn-(Al, In) as-spun ribbons

An ab initio simulation and experimental studies of the glass-forming ability and properties of Al86Ni(14-x)Zrx (x = 1∼7) alloys

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Non-Equal Contributions of Different Elements and Atomic Bonds to the Strength and Deformability of a Multicomponent Metallic Glass Zr47Cu46Al7

Microstructure and corrosion behavior of Al95- x Ni x Y5 (x = 7,10) glassy ribbons

Serration Behavior of A Zr-Based Metallic Glass under Different Constrained Loading Conditions

Increased ductility of Ni-based metallic glass ribbon pre-annealed at β-relaxation temperature

Compressive Behavior of (Cu0.47Zr0.45Al0.08)98Dy2 Bulk Metallic Glass at Different Strain Rates

Tensile ductility and necking of metallic glass