Abstract:A low power and low phase noise phase-locked loop (PLL) design for low voltage (0.8 V) applications is presented. The voltage controlled oscillator (VCO) operates from a 0.5 V voltage supply, while the other blocks operate from a 0.8 V supply. A differential NMOS-only topology is adopted for the oscillator, a modified precharge topology is applied in the phase-frequency detector (PFD), and a new feedback structure is utilized in the charge pump (CP) for ultra-low voltage applications. The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power. In addition, several novel design techniques, such as removing the tail current source, are demonstrated to cut down the phase noise. Implemented in the SMIC 0.13 mu m RF CMOS process and operated at 0.8 V supply voltage, the PLL measures a phase noise of -112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz. The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply. The occupied chip area of the PFD and CP is 100 x 100 mu m(2). The chip occupies 0.63 mm(2), and draws less than 6.54 mW from a 0.8 V supply.

Design of Low Power Programmable Pulse Swallow Counter

Design of A 1.8 V Low Power 2 GHz Prescaler

GHz Programmable Counter with Low Power Consumption

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

Design of A Programmable Multi Frequency Detector

A 2ghz Programmable Counter with New Re-Loadable D Flip-Flop

1 V 10 GHz CMOS frequency divider with low power consumption

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

Low Power High-Speed CMOS Dual-Modulus Prescaler Design with Imbalanced Phase-Switching Technique

Sub-mW Multi-Ghz CMOS Dual-Modulus Prescalers Based on Programmable Injection-Locked Frequency Dividers

Design of 5GHz Dual-modulus Divide-by-31/32 Prescaler in TSMC 0.25μm Technology

A 6-GHz dual-modulus prescaler using 180nm SiGe technology

A Low Power CMOS Phase-Switching Prescaler for 1.8–2.4 GHz Wireless Communications

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A Low- Power CMOS Ring- Based Oscillator Using Current Steering Logic Structure

A Low Power 440-Mhz Pulse-Swallow-Divider Combination Synchronization-Asynchronism-Hybrid Frequency Divider

Design of Area-Efficient GHz Range Current Mode Frequency Synthesizer Using Standard CMOS Technology

Design of Low-Power High-Speed Current Mode Dual-Modulus Prescaler with Inductive Peaking Structure

Design of Low-noise、Low-power Consumption CMOS CPPLL

A 0.8 V Low Power Low Phase-Noise Pll

A Low Area, Switched-Resistor Based Fractional-N Synthesizer Applied to a MEMS-Based Programmable Oscillator