Abstract:This paper deals with a case study for the piezoelectric materials suddenly exposed to an environmental medium of different temperature. The problem is idealized to a plate containing an edge crack or an embedded crack. The stress and electric displacement histories in an uncracked plate are calculated. These stresses and electric displacements are then added to the crack surface tractions and electric displacements with opposite sign to formulate a mixed boundary value problem. The cracking problem is thus reduced to a singular integral equation of Cauchy type, which is then solved numerically. Both impermeable crack assumption and permeable crack assumption are considered. The results for stress and electric displacement intensity factors are computed as a function of normalized time and crack size. Lower bound solutions are obtained for the maximum thermal shock that the material can sustain Without catastrophic failure according to the two distinct criteria: (i) The maximum local tensile stress equals the tensile strength of the medium. (ii) The maximum stress intensity factor for the pre-existing representative crack equals the fracture toughness of the medium. The parameters that control the transient thermal stress and electric displacement are also identified. The method can be used to explore susceptibility to thermal fracture in piezoelectric materials containing pre-cracks.

Thermal Shock Strength of A Semi-Infinite Piezoelectric Medium

Thermal shock fracture of piezoelectric materials

Surface Thermal Shock Fracture of a Semi-Infinite Piezoelectric Medium (poling Axis Parallel to the Crack Plane)

Surface Fracture of a Semi-Infinite Piezoelectric Medium under Transient Thermal Loading (poling Axis Parallel to the Edge of the Medium)

Transient Electromechanical Cracking of Finite Piezoelectric Bodies

Transient response of a piezoelectric material with a semi-infinite mode-III crack under impact loads

A Cracked Piezoelectric Material Strip under Transient Thermal Loading

Transient Thermal Elastic Fracture of a Piezoelectric Cylinder Specimen

Coupled Electromechanical Fracture of Piezoelectric Ceramics Subjected to Transient Thermal Loads

An opening crack model for thermopiezoelectric solids

FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD

Thermal shock fracture mechanics analysis of a semi-infinite medium based on the dual-phase-lag heat conduction model.

Thermal Shock of Semi-Infinite Cellular Ceramics

Thermal Stress and Intensity Release in Ferroelectric Materials by Multiple Cracking

Thermal Effects on Fracture of Piezoelectric Materials

Thermal Shock Problem Of Piezoelectric Materials With Temperature-Dependent Properties

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

Strength Evaluation of Piezoelectric Ceramics under Transient Thermal Environments

Hyperbolic Heat Conduction and Associated Transient Thermal Fracture for a Piezoelectric Material Layer

Thermal Shock Resistance and Thermal Fracture of a Thermopiezoelectric Cylinder Based on Hyperbolic Heat Conduction

Transient Response of a Semi-Infinite Piezoelectric Layer with a Surface Permeable Crack