Abstract:The rapid detection and comprehensive monitoring of quench onset and evolution in high-temperature superconducting (HTS) materials remains immensely challenging because the normal zone propagation velocity in HTS materials is two or three orders of magnitude less than that in low-temperature superconductors. In this study, we experimentally and numerically explore quench events triggered by heat spots in yttrium barium copper oxide HTS tapes to characterize the quench onset and propagation. A multiplexed fiber Bragg grating sensor with multiple gratings was used to perform highly accurate strain measurements. Conventional voltage and temperature measurements were performed synchronously on the HTS tapes. A systematic comparison of these multifield signals during quench onset and development illustrated that the evolution of thermoelastic strain and strain-rate in HTS tapes captures the quench onset and propagation. A distinct feature was exhibited during the quenching of a pre-tensioned HTS tape: the thermoelastic strain initially relaxed but subsequently increased until the strain rate exhibited a significant slope change, which corresponded to the quench onset time. The thermoelastic strain in a nearly unconstrained HTS tape gradually increased until quenching occurred. A prominent characteristic for detecting quench onset in HTS materials have been revealed based on the change in the slope of the thermoelastic strain-rate or the second derivative of the strain remaining nearly constant. For a pre-tensioned HTS tape, the minimization of the thermoelastic strain or the strain-rate becoming zero may be a predictor that preceded the quench by similar to 1-2 s, which can be, to a certain extent, regarded as an early warning. Another important and novel result was the experimental demonstration of global strain responses distant from the quench location in the pre-tensioned HTS tape, while the temperature and voltage detection are commonly localized methods. The mechanism behind these thermoelastic strain characteristics was further discussed and simulated from the induced Joule heating throughout the quench event. The measurements and numerical predictions suggested a new paradigm of quench detection based on the thermoelastic strain-rate in HTS materials.

Quench and recovery behaviors of Bi-2223/Ag HTS tapes under pulsed over-currents with different durations

Quench Developing Process of HTS Tapes under Sinusoidal Over-Currents

Electromagnetic behavior of Bi2223/Ag HTS tape under the pulse current

Quench Developing Process of HTS Tape in Sinusoidal Overcurrents with Different Amplitudes

Current-Limiting and Recovery Characteristics of Resistive-Type Superconducting Fault Current Limiters During Quench-Recovery-Requench Process

Analysis of Overcurrent Performance of YBCO Tape Considering Different Heat Exchange Conductions

Quench behavior of Bi2223/Ag tape under constant voltage

Critical Current Degradation Behavior of Coated Conductor Subjected to Repeat Overcurrent

Failure Analysis of YBCO Tapes Considering the Amplitude and Duration of Sinusoidal Overcurrent

Experimental Research on Critical Current Behavior of Various Commercial HTS Tapes

Investigations on Quench Recovery Characteristics of High-Temperature Superconducting Coated Conductors for Superconducting Fault Current Limiters

Characteristics of Bi-2223 HTS Tapes under Short-Circuit Current Impacts in Hybrid Energy Transmission Pipelines

Study On Quenching Characteristics And Resistance Equivalent Estimation Method Of Second-Generation High Temperature Superconducting Tape Under Different Overcurrent

Recovery Time of High Temperature Superconducting Tapes Exposed in Liquid Nitrogen

Dynamic response of HTS composite tapes to pulsed currents

Study of Recovery Characteristics of 2nd Generation HTS Tapes with Different Stabilizers for Resistive Type Superconducting Fault Current Limiters

Research on DC Overcurrent Characteristics and Life Prediction of YBCO Tapes

Experimental Analysis of Quench Characteristic in HTS Tapes and Coils

Quench Detection and Early Warning Based on Thermoelastic Strain Rate for HTS Tapes Thermally Triggered by Heat Spots

Visualization Experiment on Cryogenic Boiling Heat Transfer and Recovery Characteristics in the First and Second Quench of RSFCLs

Critical current of HTS tape under tensile stress