Abstract:The composite T-joint, a typical structural element, is widely used in the fields of aerospace due to their excellent mechanical properties. However, several defects might occur in this material during manufacturing because of the application of co-curing and co-bonding technologies. The existence of the defects results in the reduction in the load bearing capacity, which negatively affects the safety of the structure. In this study, a finite element (FE) model of composite T-joints is established, which is verified by quasi-static tests to investigate the load bearing capacity and failure modes of composite T-joints under bending loadings with different types of defects, including core material defects, radius floating of the fillet, and debonding defects. It is indicated that the failure modes of T-joints with different kinds of defects under bending loadings are similar, i.e., the delamination occurs firstly at the interface between the filling area and the L-rib before expanding to both sides. Meanwhile, the types of defects exert great effects on the load bearing capacity of T-joints, and the debonding defects in the arc area represent the most dangerous one. Furthermore, the orthogonal test method was adopted to analyze the influence of combined defects on the load bearing capacity of T-joints, and the findings reveal that the most sensitive type of defect is the debonding defects, followed by the radius floating of the fillet, and then core material defects. This result indicates that combined defects have a coupling effect on the load bearing capacity of composite T-joints. This study provides theoretical guidance and technical support for the repair of the defects of composite T-joints.

Study Progress in Carbon Fiber Reforced Composite Joint

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Study on the Bolt-Pin Joint Structure of Carbon Fabric Composites

Investigating the Effects of Contact Area and Chamfering on the Failure Behavior of Plain Woven Composite-Metal T-joints

Mechanical Properties of L-joint with Composite Sandwich Structure

Research Progress in Joining of Carbon Fiber-Reinforced Polymer Composites and Aluminum/magnesium Alloys

Study on flexural properties and failure mechanism of fibre/fabric reinforced composite laminates

Advances in joining technology of carbon fiber-reinforced thermoplastic composite materials and aluminum alloys

Investigations on the Mechanical Properties of Composite T-Joints with Defects under Bending Loading

Tensile Failure Analysis of Carbon Fiber Composite Material L-shaped Joint

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

The Fabrication and Microstructure Analysis of Carbon Fiber Composites with Interlaminar Reinforcement

Design and Manufacturing of a Composite Lattice Structure Reinforced by Continuous Carbon Fibers

Analysis and experiment on connection strength between the composite panel and titanium joint

Design improvement of a composite-to-steel butt-joint based on finite element analysis

Reinforced interface and mechanical properties of high strength carbon fiber composites

Mechanical study on hybrid joining type carbon fiber reinforced composite

Experimental study and finite element analysis on the joining performance of GF/PP rivets

Experimental Investigation of Double-Lap Bolted Composite Joints with Different Outer Plates Subjected to Bending Loads

Laser welding process and strength enhancement of carbon fiber reinforced thermoplastic composites and metals dissimilar joint: A review