Abstract:The layered compounds LiCoO2, LiNiO2 and spinel compound LiMn2O4 have served as very effective cathode active materials in lithium ion rechargeable batteries. Generally, their high conductive resistance easily results in a serious polarization and poor utilization of active materials.In order to make full use of the active materials and increase the capacity, the charge-discharge rate and the cycle life of lithium ion batteries, conductive additives are often added into the above cathode materials to form a conductive network. Carbon materials, such as carbon black, graphite powders and chemical vapor deposit carbon fibers have been widely used as conductive additives owing to their high electrical conductivity and chemical inertness. To effectively utilize the active materials, the contents of these carbon additives in the cathode often reach up to 10～20wt%. This leads to a great need for binder, for example, 10wt% or more. It follows therefore a considerable increase in volume of the lithium batteries and lower energy density because of the large amount of carbon additives and binder in the cathode.By substituting carbon nanotubes (CNTs) for carbon black, graphite powders or chemical vapor deposit carbon fibers, much conductive additives and binder are saved, and the cathode with only 3～5wt% of conductive additives CNTs shows excellent rate capacity. At the discharge rate 0.5C,2.0C and 3.0C, the LiCoO2 cathode with CNTs exhibits discharge capacity up to 134mAh/g, 126 and 120mAh/g, respectively. The explanation is given as follows. Firstly, their microstructure and graphitic crystallinity are very important for electron transport. CNTs employed in the experiments comprise an array of complete graphite sheets seamlessly wrapped into cylindrical tubes which are concentrically nested like the rings of a tree trunk. Thus, the process of -electrons transport occurs in graphite sheet in super-conjugative manner when they move from one end to the other end in CNTs. Apparently, the CNTs' microstructure does good to

Application of carbon nanotubes as anode materials for Li-ion battery

Two-Dimensional SnSe2/CNTs Hybrid Nanostructures As Anode Materials for High-Performance Lithium-Ion Batteries

Study on Carbon Nanoparticles for Anode Materials of Lithium-Ion Battery

Carbon Nanotube Array Anodes for High-Rate Li-ion Batteries

Effect of Carbon Nanotubes on the Anode Performance of Natural Graphite for Lithium Ion Batteries

Nanocomposites As Anode for Lithium-Ion Battery

Electrochemical Intercalation of Lithium into Carbon Nanoparticles

Carbon Nanotubes Act As Conductive Additives in the Cathode of Lithium Ion Batteries

Sandwich-like CNTs/Si/C nanotubes as high performance anode materials for lithium-ion batteries

Preparation and application of bamboo-like carbon nanotubes in lithium ion batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Nano-TiNb2O7/carbon Nanotubes Composite Anode for Enhanced Lithium-Ion Storage

Interconnected Bi5Nb3O15@CNTs network as high-performance anode materials of Li-ion battery

CNT@TiO2 Nanohybrids for High-Performance Anode of Lithium-Ion Batteries.

Long‐Cycle Electrochemical Behavior of Multiwall Carbon Nanotubes Synthesized on Stainless Steel in Li Ion Batteries

The nanocomposites of carbon nanotube with Sb and SnSb0.5 as Li-ion battery anodes

Adding CNTs into Anthracite towards High Performance Anode Materials for Lithium Ion Batteries

Electrochemical Investigation of Carbon Nanotubes as Additives in Positive Electrodes of Ni∕MH Batteries

Carbon nanotubes loaded with carbon nanofibers as scaffold for Li metal battery anodes

Regulating the interfacial behavior of carbon nanotubes for fast lithium storage

Electrochemical investigation on addition of CNTs to the positive electrodes for Ni/MH rechargeable batteries