Abstract:The layered compounds LiCoO2, LiNiO2 and spinel compound LiMn2O4 have served as very effective cathode active materials in lithium ion rechargeable batteries. Generally, their high conductive resistance easily results in a serious polarization and poor utilization of active materials.In order to make full use of the active materials and increase the capacity, the charge-discharge rate and the cycle life of lithium ion batteries, conductive additives are often added into the above cathode materials to form a conductive network. Carbon materials, such as carbon black, graphite powders and chemical vapor deposit carbon fibers have been widely used as conductive additives owing to their high electrical conductivity and chemical inertness. To effectively utilize the active materials, the contents of these carbon additives in the cathode often reach up to 10～20wt%. This leads to a great need for binder, for example, 10wt% or more. It follows therefore a considerable increase in volume of the lithium batteries and lower energy density because of the large amount of carbon additives and binder in the cathode.By substituting carbon nanotubes (CNTs) for carbon black, graphite powders or chemical vapor deposit carbon fibers, much conductive additives and binder are saved, and the cathode with only 3～5wt% of conductive additives CNTs shows excellent rate capacity. At the discharge rate 0.5C,2.0C and 3.0C, the LiCoO2 cathode with CNTs exhibits discharge capacity up to 134mAh/g, 126 and 120mAh/g, respectively. The explanation is given as follows. Firstly, their microstructure and graphitic crystallinity are very important for electron transport. CNTs employed in the experiments comprise an array of complete graphite sheets seamlessly wrapped into cylindrical tubes which are concentrically nested like the rings of a tree trunk. Thus, the process of -electrons transport occurs in graphite sheet in super-conjugative manner when they move from one end to the other end in CNTs. Apparently, the CNTs' microstructure does good to

Preparation and application of bamboo-like carbon nanotubes in lithium ion batteries

Application of Carbon Nanotube in Lithium-Ion Battery Cathodes

Application of carbon nanotubes as anode materials for Li-ion battery

Preparation of Short Carbon Nanotubes and Application As an Electrode Material in Li‐Ion Batteries

Cost-effective synthesis of bamboo-structure carbon nanotubes from coal for reversible lithium storage

Sandwich-like CNTs/Si/C nanotubes as high performance anode materials for lithium-ion batteries

Nitrogen-doped Bamboo-Like Carbon Nanotubes: Promising Anode Materials for Sodium-Ion Batteries.

Interconnected Bi5Nb3O15@CNTs network as high-performance anode materials of Li-ion battery

Carbon Nanotube Array Anodes for High-Rate Li-ion Batteries

Preparation and Electrochemical Properties of Nanocable-Like Nb2O5/surface-modified Carbon Nanotubes Composites for Anode Materials in Lithium Ion Batteries

Preparation of Carbon Nanowall and Carbon Nanotube for Anode Material of Lithium-Ion Battery

Nano-TiNb2O7/carbon Nanotubes Composite Anode for Enhanced Lithium-Ion Storage

The Creation of Hollow Walls in Carbon Nanotubes for High-Performance Lithium Ion Batteries

Preparation of bamboo carbon fiber and sandwich-like bamboo carbon fiber@SnO2@carbon composites and their potential application in structural lithium-ion battery anodes

Carbon Nanotubes Act As Conductive Additives in the Cathode of Lithium Ion Batteries

Regulating the interfacial behavior of carbon nanotubes for fast lithium storage

Preparation and Electrochemical Performance of Li_2MnSiO_4/CNTs Composite Cathode Material for Lithium Ion Batteries

Improved Electrochemical Performance of CuCrO2 Anode with CNTs As Conductive Agent for Lithium Ion Batteries

Synthesis and Characterization of Sb/CNT and Bi/CNT Composites As Anode Materials for Lithium-Ion Batteries

Applications of Long-Length Carbon Nano-Tube (L-CNT) as Conductive Materials in High Energy Density Pouch Type Lithium Ion Batteries

In Situ Growth of Carbon Nanotube Wrapped Si Composites As Anodes for High Performance Lithium Ion Batteries.