Abstract:Micro-electromechanical systems and nano-electromechanical systems have attracted a great deal of attention in recent years. The flow and heat transfer behaviors of micromachines for separation applications are usually different from that of macro counterparts. In this paper, heat and mass transfer characteristics of rarefied nitrogen gas flows in microchannels are investigated using direct simulation Monte Carlo with improved pressure boundary conditions. The influence of aspect ratio and wall temperature on mass flowrate and wall heat flux in microchannels are studied parametrically. In order to examine the aspect ratio effect on heat and mass transfer behaviors, the wall temperature is set constant at 350 K and the aspect ratio of the microchannel varies from 5 to 20. The results show that as the aspect ratio increases, the velocity of the flow decreases, so does the mass flowrate. In a small aspect ratio channel, the heat transfer occurs throughout the microchannel; as the aspect ratio of the microchannel increases, the region of thermal equilibrium extends. To investigate the effects of wall temperature (Tw) on the mass flowrate and wall heat flux in a microchannel, the temperature of the incoming gas flow (Tin) is set constant at 300 K and the wall temperature varies from 200 K to 800 K while the aspect ratio is remained unchanged. Results show that majority of the wall heat flux stays within the channel entrance region and drops to nearly zero at the halfway in the channel. When TwTin, the molecular number density of the flow drops rapidly near the inlet and the temperature of the gas flow increases along the channel. As Tw increases, the flow becomes more rarefied, the mass flowrate decreases, and the resistance at the entrance region increases. Furthermore, when Tw>Tin, a sudden jump of heat transfer flux and temperature are observed at the exit region of the channel.

Numerical Study of Mass Transfer Coefficient in a 3D Flat-Plate Rectangular Microchannel Bioreactor

Effect of Tip Clearance on the Heat Transfer and Pressure Drop Performance in the Micro-Reactor with Micro-Pin–fin Arrays at Low Reynolds Number

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Numerical simulation and experiment of laminar heat transfer characteristics in micro-channel collector

Mass transfer to reactive boundaries from steady three-dimensional flows in microchannels

Heat and mass transfer characteristics in reforming micro-reactor with micro-pin-fin arrays

Using Direct Simulation Monte Carlo with Improved Boundary Conditions for Heat and Mass Transfer in Microchannels

NUMERICAL SIMULATION OF TRANSVERSE DIFFUSION IN A MICROCHANNEL

Numerical Simulation of Bubble-Liquid Two-Phase Turbulent Flows in Shallow Bioreactor

Numerical investigation of mass transfer behavior of a gas–liquid two‐phase Taylor flow in a microchannel by a volume‐of‐fluid multiphase flow system

Characterization of Liquid-Liquid Two-Phase Flow Patterns and Mass Transfer Coefficients in Human-Shaped Microchannels

Numerical study of thermal-hydraulic performance enhancement in a shell-and-tube milli-reactor

Numerical Simulation of Stability Behaviors and Heat Transfer Characteristics for Near-Critical Fluid Microchannel Flows

Numerical simulation of boiling behavior in vertical microchannels

Numerical study on thermal transpiration flows through a rectangular channel

Numerical Investigations of Micro-Slm Extraction/stripping in a Spiral Channel

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

Experimental and Numerical Studies of Fluid Flow Confined in Microchannel

Experimental and numerical investigations of motion and mass transfer of single bubbles in a turbulent flow chamber

The evolution of mental health care.

A Numerical Study of Quasi-Nucleate Boiling in Mini- and Micro Channels