Abstract:A fiber optic sensing system consisting of a fiber Bragg grating (FBG) sensor, optical circulator, optical band pass filter and photodetector is developed to monitor the real-time temperature response of a structure under a dynamic thermal loading. The FBG sensor is surface-bonded on a test specimen and integrated with an optical band pass filter. As a broadband light source transmits into a FBG sensor, a specific wavelength is reflected and transmitted into an optical band pass filter. The reflected wavelength is significantly affected by the temperature, while the output light power from the optical band pass filter is dependent on the wavelength. By measuring the light power with a photodetector, the wavelength can be demodulated, resulting in the determination of the temperature. In this work, the proposed optical sensing system was utilized to monitor the dynamic temperature change of a steel beam under a thermal cycling loading. To verify the accuracy of the fiber optic sensor, a thermocouple was adopted as the reference. The experimental results illustrate a good agreement between the fiber optic sensor and thermocouple. Electronic packages composed of various components such as a solder joint, silicon die, mold compound, and solder mask are frequently subjected to a thermal cycling loading in real-life applications. Temperature variations' incorporation with mismatches of coefficients of thermal expansion among the assembly components leads to crack growth, damage accumulation and final failure. It is important to monitor the temperature to prevent a thermal fatigue failure. A fast response and easy implementation of the fiber optic sensing system was proposed for the real-time temperature measurement under thermal cycling loading.

Temperature measurement of heat affected zone using fiber Bragg grating during the TIG welding process of low-carbon steel sheet

Temperature Sensing of Metal-Coated Fiber Bragg Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Experiment on Embedding FBG Sensor into Intelligent Metal Structures

The Research for Embedding Optical Fiber Bragg Grating in the Steel Beam and the Sensing Properties

Simultaneous Measurement of the Temperature and Force Using A Steel Cantilever Soldered with A Partially Nickel Coated In-Fibre Bragg Grating

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Temperature Stability of High Ge-doped Fibre Bragg Grating

Fiber bragg grating sensor metallization and embedding into 42CrMo steel by soldering

A Real-time In-situ Wafer Temperature Measurement System Based on Fiber Bragg Grating Array

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Fiber Bragg grating temperature sensor for marine application

Application of fiber Bragg grating sensor network in aluminum reduction tank shell temperature monitoring

A study of the temperature sensitivity of fiber Bragg gratings after metallization

Dynamic large strain measurement under high-temperature environment using a modified FBG sensor and plasma surface treatment

An Electroplating Method for Surface Mounting Optical Fiber Sensors on the Metal Substrate

Analysis and Simulation on Stress and Strain of Fiber Bragg Grating in Smart Metal Structure

Study of Sensing Properties and Contrastive Analysis of Metal Coating Optical Fiber Grating

Real-Time Temperature Monitoring under Thermal Cycling Loading with Optical Fiber Sensor

Study of smart cantilever beam temperature characteristic based on FBGA demodulation system

Metal Coating of Fiber Bragg Grating and the Temperature Sensing Character after Metallization