Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Utilization of Titanate Nanotubes as an Electrode Material in Dye-Sensitized Solar Cells

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

A novel approach to titania nanowire arrays as photoanodes of back-illuminated dye-sensitized solar cells

TiO 2 nanoparticle seeds transformed into nanotubes for effective dye-sensitized solar cell application

Hydrothermally synthesized titania nanotubes as a promising electron transport medium in dye sensitized solar cells exhibiting a record efficiency of 7.6% for 1-D based devices

Anatase TiO2 nanotubes as photoanode for dye-sensitized solar cells.

Carbon-doped Titanum Dioxide Nanocrystals for Highly Efficient Dye-Sensitized Solar Cells

Highly Efficient Dye-Sensitized Solar Cells Composed of Mesoporous Titanium Dioxide

Design and Preparation of Nano-Electrodes for Dye-Sensitized Solar Cell

Highly-ordered Dye-Sensitized TiO 2 Nanotube Arrays Film Used for Improving Photoelectrochemical Electrodes

Nitrogen-doped TiO2 Nanoparticles Better TiO2 Nanotube Array Photo-Anodes for Dye Sensitized Solar Cells

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Aggregated TiO 2 -Based Nanotubes for Dye Sensitized Solar Cells

Partially nanowire-structured TiO2 electrode for dye-sensitized solar cells

Enhanced Photoelectrochemical Property of TiO 2 Nanotube Array Photoanode Deposited with Al,Cr-Codoped SrTiO 3 Nanocubes

Carbon Nanotubes in Dye-Sensitized Solar Cells Photo-Anode

Electrochemical Formation of Pt Nanoparticles on Multiwalled Carbon Nanotubes: Useful for Fabricating Electrodes for Use in Dye-Sensitized Solar Cells

Electron Transport in Dye-Sensitized Solar Cells Based on Tio2 Nanowires

Double-layer Electrode Based on TiO2 Nanotubes Arrays for Enhancing Photovoltaic Properties in Dye-Sensitized Solar Cells.