Abstract:Based on the constraint and position identification (CPI) approach for synthesizing XYZ compliant parallel mechanisms (CPMs) and configuration modifications, this paper proposes a new fully-symmetrical XYZ CPM with desired motion characteristics such as reduced cross-axis coupling, minimized lost motion, and relatively small parasitic motion. The good motion characteristics arise from not only its symmetric configuration, but also the rigid linkages between non-adjacent rigid stages. Comprehensive kinematic analysis is carried out based on a series of finite element simulations over a motion range per axis less than ±5% of the beam length, which reveals that the maximum cross-axis coupling rate is less than 0.86%, the maximum lost motion rate is less than 1.20%, the parasitic rotations of the motion stage (MS) are in the order of 10−5 rad, and the parasitic translations of the three actuated stages (ASs) are in the order of 10−4 of the beam length (less than 0.3% of the motion range), where the beam slenderness ratio is larger than 20. Furthermore, the nonlinear analytical models of the primary translations of the XYZ CPM, including the primary translations of the MS and the ASs, are derived and validated to provide a quick design synthesis. Moreover, two practical design schemes of the proposed XYZ CPM are discussed with consideration of the manufacturability. The practical designs enable the XYZ CPM to be employed in many applications such as micro-/nano-positioning, micro-/nano-manufacturing and micro-/nano-assembly. Finally, a spatial high-precision translational system is presented based on the practical design schemes, taking the actuator and sensor integration into account.

A Novel Large-Range XY Compliant Parallel Micromanipulator

Design and Analysis of New Large-Range Xy Compliant Parallel Micromanipulators

Design and Experimental Testing of an Improved Large-Range Decoupled XY Compliant Parallel Micromanipulator1

A New XYZ Compliant Parallel Mechanism for Micro-/Nano-Manipulation: Design and Analysis.

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Design and Modeling of a Novel Monolithic Parallel XY Stage with Centimeters Travel Range

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Mechatronic Design of a Novel Linear Compliant Positioning Stage with Large Travel Range and High Out-of-plane Payload Capacity

Design and Development of a Novel Monolithic Compliant XY Stage with Centimeter Travel Range and High Payload Capacity

Redundantly Piezo-Actuated XYθ Z Compliant Mechanism for Nano-Positioning Featuring Simple Kinematics, Bi-Directional Motion and Enlarged Workspace

A Spatial Design of a Large Stroke Compliant XY Nanomanipulator with Cross-Coupling Error Reduction

A Parallelogram-Based Compliant Remote-Center-of-motion Stage for Active Parallel Alignment

Development of a Large-Range XY-Compliant Micropositioning Stage with Laser-Based Sensing and Active Disturbance Rejection Control

Large Stroke Electromagnetic Redundant Actuated Six Degrees-of-freedom Parallel Compliant Micropositioning Stage

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

Design of a decoupled 2-DOF translational parallel micro-positioning stage

Voice Coil Motor-Driven Multi-Dof Compliant Parallel Micropositioning Stage Based on a Large Range Beam-Based Spherical Hinge and Fully Symmetrical Layout

A Large Range Compliant XY Nano-Manipulator with Active Parasitic Rotation Rejection

A Large-Range Compliant Micropositioning Stage with Remote-Center-of-motion Characteristic for Parallel Alignment

Structural Design and Experimental Evaluation of a Coarse-Fine Parallel Dual-Actuation XY Flexure Micropositioner with Low Interference Behavior

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification