Abstract:High-resolution and high-sensitivity molecular spectroscopy is widely used in fundamental molecular physics, atmospheric studies, remote sensing, industrial process monitoring, and medical diagnostics. Accurate determination of the parameters of molecule absorption lines, such as line positions, line strengths, line widths and profiles, is essential to support these studies and applications. For example, in order to retrieve the column density of carbon dioxide with a precision of one part per million (ppm), we need laboratory data of line positions with a uncertainty lower than 0.3 MHz and line intensities with a relative accuracy better than 0.5%. Here we present precision spectroscopy of molecules using a laser locked with a high-finesse cavity. The cavity made of invar is thermo-stabilized to reduce the drifts of its length and the cavity mode frequencies. The frequency of the probe laser is locked on a longitudinal mode of the cavity by using the Pound-Drever-Hall method. Another beam from the probe laser, which is frequency shifted and on resonance with a nearby longitudinal mode of the cavity, is used for cavity ring-down spectrum (CRDS) measurement. The CRDS absorption spectrum is recorded by stepping the modulation frequency of a fiber electro-optic modulator in increment of the mode spacing of the cavity. Note that the cavity mode frequencies are shifted due to the dispersion introduced by the absorption lines. Prior to the CRDS measurements, the transmittance spectra of the cavity modes are recorded by scanning the probe laser frequencies over the resonance, which allows the determination of the cavity mode frequencies with an accuracy at a Hz level. Therefore, a dispersion spectrum is also obtained using the same setup by measuring the frequency shifts of cavity modes of the samples with and without absorption. The absolute frequency of the probe laser is determined by an optical frequency comb referring to a GPS-disciplined rubidium clock. The long term drift of beat frequency between the optical frequency comb and the probe laser is measured to be about 1.8 MHz per hour, which is consistent with the thermal expansion of the cavity under a temperature drift of 50 mK. The performance of the spectrometer is demonstrated by measuring the Doppler-broadened spectra of CO2 around 6470.42 cm-1. Precise spectroscopic parameters are derived from both the absorption and dispersion spectra recorded by the same spectrometer. The line position is determined with an accuracy of 0.18 MHz, which is over one order of magnitude better than those given in previous studies and spectral databases.

High-resolution Cavity Enhanced Absorption Spectroscopy Using an Optical Cavity with Ultra-High Reflectivity Mirrors

Cavity Enhanced Absorption Spectroscopy Based on A Tunable Dfb Diode Laser

[The Study of CO2 Cavity Enhanced Absorption and Highly Sensitive Absorption Spectroscopy].

Cavity Enhanced Absorption Spectroscopy of Molecular Carbon Dioxide Near Ir Region with A Dfb Diode Laser

Scanning cavity OF-CEAS technique for rapid collection of high resolution spectra

Study of Cavity Enhanced Absorption Spectroscopy Based on a Swept Diode Laser

Cavity Enhanced Absorption Spectroscopy of Carbon Dioxide Using a DFB Diode Laser and a Swept Optical Cavity

Cavity Enhanced Absorption Spectrum Measurement Using an Optical Parametric Oscillator

Cavity-Enhanced Absorption Measurements Across Broad Absorbance and Reflectivity Ranges

Prism-based Broadband Optical Cavity (400 – 1600 nm) for High-Sensitivity Trace Gas Sensing by Cavity Enhanced Absorption Spectroscopy

Cavity-Enhanced Absorption Spectroscopy with A Ps-Pulsed Uv Laser for Sensitive, High-Speed Measurements in A Shock Tube

Measurement of Molecular Absorption Spectrum with Alaser Locked on a High-Finesse Cavity

Sensitive and Rapid Laser Diagnostic for Shock Tube Kinetics Studies Using Cavity-Enhanced Absorption Spectroscopy

Note: Deep Ultraviolet Raman Spectrograph with the Laser Excitation Line Down to 177.3 Nm and Its Application

Repetitively Mode-Locked Cavity-Enhanced Absorption Spectroscopy (RML-CEAS) for Near-Infrared Gas Sensing

Cavity-enhanced Absorption Spectroscopy for Shocktubes: Design and Optimization

Preliminary Studies of a Laser Source Used to Test Mirrors under High Power Density with a Closed Cavity

Adaptive Cavity-Enhanced Dual-Comb Spectroscopy

Cavity Enhanced Absorption Spectroscopy Using Off-Axis Alignment

Editorial: Cavity-enhanced optical spectroscopy

The Study of Gas Detection Based on the Cavity Enhanced Absorption Spectroscopy Technology