Abstract:Means of measuring various parameters and technical characteristics of radio equipment have always occupied leading positions in science and technology. Without an accurate definition of the relevant values, it is impossible to build modern high-quality radio communication systems, radar, navigation ground and satellite systems. In ultrasound diagnostics, which are used in medicine, the speed of blood flow in vessels is studied by determining the frequency of the reflected signal. At the same time, it is necessary to use high-speed frequency measurement tools in systems with active sensors used in telecommunication networks based on Internet of Things technology. For example, in active radar, using the frequency of the reflected signal, it is possible to calculate not only the coordinates, but also the circular speed of the moving target. Modern research is aimed at improving the metrological and technical indicators of existing measuring devices, in particular at developing new methods for correcting the characteristics of the transformation of the measuring channel, which is their main component. At the same time, most digital frequency meters are built on the method of counting the number of pulses N with an unknown period Tx that arrive at the input of the device during a calibrated time interval. All this leads to an increase in measurement time and requires additional hardware costs for fast processing of measurement results. The coincidence method belongs to vernier methods and is promising for use when measuring the frequency of periodic signals. This paper points out the shortcomings of known methods of measuring the frequency of a periodic signal. On the basis of the well-known method of coincidence, a functional scheme of a 16-bit device for measuring frequency, which is implemented on the basis of a FPGA from Intel (Altera), has been developed. The developed coincidence frequency meter has a dynamic range of 96dB. Representation of time diagrams obtained in the Quartus Prime 18.0 automated design environment and confirming the operability of the developed functional scheme of the 16-bit device for frequency measurement by the coincidence method. An analytical dependence for determining the frequency of a periodic signal during frequency measurement by the coincidence method is presented.

Research of Complete Synchronization Frequency Measurement Method Based on Phase Coincidence

Multi-chip Phase Synchronization Circuit of Fractional-N PLL

A Study and Analysis of High-Accuracy Network Synchronization Based on IEEE1588

Easy-hardware-implementation Algorithm of Sampling Frequency Synchronization in OFDM Systems

Clock synchronization method and system

IMPLEMENTATION OF THE COINCIDENCE FREQUENCY METER ON FPGA

Practical system for phase noise measurement of optoelectronic oscillators

Real-time Phase Difference Measurement Method with FPGA Speeding Up

The Simulation of Synchronizer Based on Missile

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA

Design Of A Multi-Path Synchronous Frequency Meter With High Accuracy

A Time Synchronization Mechanism and Algorithm Based on Phase Lock Loop

A New Synchronized Phasor Measurement Unit on Electric Power System

A New Accurate Measuring Method of Phase Difference Suitable for Asynchronous Sampling

Hardware-based Solution of Precise Time Synchronization for Networked Control System

Parallel Structure of All Digital Timing Synchronization and Realization of FPGA

Differential Phase Measurement With External Trigger

High Precision Synchronization System Based on FPGA

Research on the key technology of high-precision waveform synchronization identification and measurement

A synchronization acquisition algorithm based on the frequency hopping pulses combining

Synchroniged Mesurement of the Frequency and Phase Angle Based on ATMEGA16L