Abstract:Since the monumental work conducted by Whitesides et al. in 2007, research and development of paper-based microfluidics has been widely carried out, with its applications ranging from chemical and biological detection and analysis, to environmental monitoring and food-safety inspection. Paper-based microfluidics possesses several competitive advantages over other substrate materials, such as being simple, inexpensive, power-free for fluid transport, lightweight, biodegradable, biocompatible, good for colorimetric tests, flammable for easy disposal of used paper-based diagnostic devices by incineration, and being chemically modifiable. Myriad methods have been demonstrated to fabricate paper-based microfluidics, such as solid wax printing, cutting, photolithography, microembossing, etc. In this study, fabrication of paper-based microfluidics was demonstrated by spray on the printed paper. Different from the normally used filter papers, printing paper, which is much more accessible and cheaper, was utilized as the substrate material. The toner was intended to serve as the mask and the patterned hydrophobic barrier was formed after spray and heating. The processing parameters such as toner coverage on the printing paper, properties of the hydrophobic spray, surface properties of the paper, and curing temperature and time were systematically investigated. It was found that, after repetitive printing four times, the toner was able to prevent the hydrophobic spray (the mixture of PDMS and ethyl acetate) from wicking through the printing paper. The overall processing time for fabrication of paper-based microfluidic chips was less than 10 min and the technique is potentially scalable. Glucose detection was conducted using the microfluidic paper-based analytical devices (μPADs) as fabricated and a linear relationship was obtained between 1 and 10 mM.

Electrochemical Sensing in Paper-Based Microfluidic Devices.

Advances on Microfluidic Paper-Based Electroanalytical Devices

Three-dimensional Paper-Based Microfluidic Electrochemical Integrated Devices (3D-PMED) for Wearable Electrochemical Glucose Detection

An Integrated and Conductive Hydrogel-Paper Patch for Simultaneous Sensing of Chemical-Electrophysiological Signals

A Paper-Based Microfluidic Device for Real-Time Sweat Potassium Monitoring

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

Papertronics: Integrating Electronics and Microfluidics on Paper for Sustainable Electroanalysis

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

A three-dimensional electrochemical paper-based analytical device for low-cost diagnostics

Electrochemical Paper‐Based Microfluidics: Harnessing Capillary Flow for Advanced Diagnostics

Flexible And Easy-To-Fabricate Electrochemical Sensors Integrating An Absorption Layer With Paper Microfluidic

3D Printed Paper-Based Microfluidic Analytical Devices

Pen-on-paper strategy for point-of-care testing: Rapid prototyping of fully written microfluidic biosensor

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Integration of paper-based microfluidic devices with commercial electrochemical readers.

Fabrication of paper-based microfluidic devices by octadecyltrichlorosilane self-assembling and uv-patterning

Ionogel Infiltrated Paper As Flexible Electrode for Wearable All-Paper Based Sensors in Active and Passive Modes

A Microfluidic PET-Based Electrochemical Glucose Sensor

Recent advances in microfluidic paper-based electrochemiluminescence analytical devices for point-of-care testing applications

Craft-and-Stick Xurographic Manufacturing of Integrated Microfluidic Electrochemical Sensing Platform

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper